TKInteriors

Happy New Year! I am having shoulder surgery February 8 and will be in a sling for 6 weeks (until mid-March). Need to hire someone to make revisions on existing projects and/or start new projects using Premier X14. Mostly whole residence or commercial projects put there are the occasional kitchen and/or bath(s) when only elevations are required. Would prefer someone local to Southern California. Kindly respond with your hourly rate. Kind regards, Tamela

Current purchase cost from CA is $3,295.00 Please contact if interested.

I have an X13 with current SSA for sale which will include the x14 upgrade. $2595 -- $700 less than current list price.

Thank you.

We have an additional X13 Premier we no longer require. $2000.00 and we will cover transfer fee. Kind regards, Tamela

Hi there, x12Premier I need someone who can screen share and help me create this roof. Single level, mostly 8' ceilings with some vaults to 12' I have the plan built . Need an accurate roof. Not my strength and takes me too much time but want to learn more. Recently received email from a CA member who teaches. Please reach out to me with approximate time and cost to help. Kind regards, Tamela

X12 Premier The molding is wrapping soffits and walls. I didn't use a Molding Polyline. ...back to the drawing board. Thank you, Tamela

Hi there, I created a custom molding using polylines then created "Molding" symbol. It wraps fine on the inside corners but doesn't connect at the outside corner. See attached. And thanks in advance for the help. Kind regards, Tamela

Katy in Tech Support told me to send to layout in Vector or Technical View. This way I can use Plot Lines. Thanks for your help!! Kind regards, Tamela

Thank you for the reply. Within the Send to Layout dialog, Plot Lines within Camera View Options is grayed out.

Hi there! When I sent a wall elevation to a layout sheet the lines become fuzzy and/or weak. Within the Rendering Technique Options dialog I change the Extend, Squiggle amplitude and frequency to zero. Within the Send To Layout dialog I send as Entire Plan/View and Live View/Update on Demand. Scaling, I send Use Layout Line Scaling. I've attached a sample. Any help in getting sharp lines will be appreciated. Kind regards, Tamela

Thanks again for everyones help. I rebuilt the tower from the second floor (too high in my opinion but thats what the architect sent) using an invisible wall. Then I used SOLVER's advice on window moulding for the tower window. Used the wedge shape to fit over door creating top inset/slope in the alcove. Thankfully, this is not a project I need to produce construction plans! Sincere appreciation! Tamela

Bummer, didn't work the way I needed it to. The depth is 36" inches surrounding the door. Reference the pdf, lower right corner, SEC A, shows the cut view. Door on bottom, window above it. Kind regards, Tamela

I can try that! Thank you, Tamela

Hi there, I am struggling with how to build a stacked alcove: one for the entry door and the other for a window. I've tried a slopped soffit to no avail. Any advice would be greatly appreciated. Kind regards, Tamela ps: soffit not shown slopped in images xxxxx.pdf

I am using x11 and this new file you sent opened. Thank you so very much. I am finishing up another job this evening but this window project is first on the boards in the morning -- then I can dig into what you did exactly. Kind regards, Tamela

Thank you! I was able to open the image but not the plan. I'll go back and try to make it work with your suggestion. Much appreciation, Tamela

Thanks in advance for your help.... I need to recreate the window circled in the attached image. Notice the window is inset several inches thus the horizontal header is broken under the arch. Hopeful someone has done this before. Kind regards, Tamela

Thanks in advance for any help.... I need to add LED lighting along the inside of ceiling coffers. I tried recessed strip lighting but the gaps between the lights are two large. I am inserting Added Lights but can't add anymore than you see in the plan view. Any suggestions would be appreciated. Kind regards, Tamela

I sent plan file into CA tech support and they could not supply an answer other than turn off sunlight -- which I had already done. Hoping they get enough questions they will look into further.

Yes, as mentioned, there is a second floor and a roof.

Thank you, sunlight is off. I have all lighting turned off except what is seen (confirmed in ADJUST LIGHTS)

Using X10 Premier.... In the ray trace there is light emitting brightly on the far right. As one can see in my plan, this room is deep inside the building and no windows anywhere around. There is a second story with a roof. The rendered view shows a bit of shadow on the far tight. Can anyone suggest where this light is coming from and how can I avoid it? Kind regards, Tamela