stevenyhof

Boxed Roof issue

Recommended Posts

I have run into this a few times and can't seem to get rid of it. I do not want the boxed fascia on the gable end.

I want what is on the left, not on the right.

I even deleted the right roof and copied the left to the right - it just comes back.

Thoughts?

Thank you!

SND1854 Potter Barn.plan

1.jpg

Share this post


Link to post
Share on other sites

Those are really buggy and seem to eventually get correct. If you pull the porch roof back several feet, the main roof will fix itself.

 

And why do you have a p-solid here?

 

ct1.thumb.png.96ef69c4e89c9f240709ef4a99ff5678.png

Share this post


Link to post
Share on other sites
1 minute ago, solver said:

Those are really buggy and seem to eventually get correct. If you pull the porch roof back several feet, the main roof will fix itself.

 

And why do you have a p-solid here?

 

ct1.thumb.png.96ef69c4e89c9f240709ef4a99ff5678.png

Thank you - I did not think the other roof would do this, but I will remember that.

Share this post


Link to post
Share on other sites
1 minute ago, solver said:

Make that wall a Pony Wall :)

 

I use pony walls for my foundation and some brick/stone walls on the main floor, but did not know I could use them in the attic. I will make it happen! Thank you

Share this post


Link to post
Share on other sites

Actually in this case, the attic wall split at the trim board so just changed the material. I've done some strange things with gable materials so was just not thinking - that was much faster. But I will mess with pony walls also.

 

Share this post


Link to post
Share on other sites
3 minutes ago, stevenyhof said:

the attic wall split at the trim board

 

The split was just a little below, I think. Material regions are also better than p-solids as they replace the materials.

 

I deleted and redrew the porch roof and changed the wall polyline for the wall the roof butts into.

 

ct1.thumb.png.75c88fac031771547c58e9094799864e.png

 

 

 

310642828_SND1854PotterBarn (eric).zip

Share this post


Link to post
Share on other sites
4 minutes ago, solver said:

 

The split was just a little below, I think. Material regions are also better than p-solids as they replace the materials.

 

I deleted and redrew the porch roof and changed the wall polyline for the wall the roof butts into.

 

ct1.thumb.png.75c88fac031771547c58e9094799864e.png

 

 

 

310642828_SND1854PotterBarn (eric).zip

Thank you Sir!

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

  • Member Statistics

    28847
    Total Members
    9156
    Most Online
    SWinteriordesign
    Newest Member
    SWinteriordesign
    Joined
  • Similar Content

    • By stevenyhof
      Hello,
      How do others deal with this issue of showing only the main wall layer, and also show the pony wall details?
      https://www.loom.com/share/065ec43bccca444189befa2716629d75
      Thank you,
      Steve
    • By stevenyhof
      Hello,
      Two questions...
      I lost one of my folders in my library - I must of deleted it by accident. How do I find it back? Is there a way to export/save my Library so I can restore it if something like this happens? Thank you
    • By stevenyhof
      Right now my Polyline Solid defaults to concrete. Is there a way to make the default Brite?
      Thank you!
    • By stevenyhof
      I was drawing a house the other day that required a deck and stairs with a railing for the front porch. I always use a room to start with and post to beam.
       
      As I continue to use Chief I begin to learn how things work related to how rooms can connect at a 0 edge (no overlap). I'm putting this out there because some of you veterans always find other unique ways of doing things I am not thinking about. But more importantly, for Chief to offer a few more added options to what I think is a standard practice in building.

      I have watched a number of videos about how to extend a concrete porch far enough to extend past the column base trim. So I do that and recently made a slab to look like a deck and works great on the sections as well. I would go so far as to say I have at times seen someone build a porch in real life where the trim overhung the porch/deck edge because of miscalculation or unskilled carpenter (which would start with the framer). I say this because Chief in trying to be a simple tool is suggesting that all posts and columns have no base trim or that base trim exists inside the room boundary. (Yes, there is a style that keeps its trim and crown molding inside the beam boundary - I cannot remember the last time I used it nor does it fit the history of columns and beams.) Beauty is in the eye of the beholder? I don't find it beautiful.
       
      As shown in the picture, when a stairs is added there is a gap between the end of the stairs rail (where it meets the room boundary) and the railing centered on the columns. This gap exists because the edge of the porch or deck needs to contain the trim of the column - plus an inch or so. I made a stairs rail into a symbol to fill this gap, albeit not the most beautiful in short time.
       
      So, two things. But one (1.) more important. 
      Add an option in the stairs dbx to extend the stair railing - even to allow the relationship of the joining railings to be disconnected (no relationship) if wanted. Kind of like how we can control the stairs skirt board that allow us to extend beyond the width. Add an option to extend a room floor beyond the room ceiling - allowed only where no other room is connected - like a porch. (I understand we are drawing what can be constructed and therefore in real life rooms do not overlap). Every house I draw has some form of a front porch and most have a rear porch. These spaces/rooms are typically connected to other room spaces by one, two or three walls. Which means there is always the possibility to have one to three edges extend beyond the ceiling boundary into space outside the house - allowing the column trim to rest properly inside the porch or deck edge.  
      Thank you,
      Steve
       
       

    • By stevenyhof
      Is there a way to change the line style on a door to a dashed line so I can show it as a future door?