Recommended Posts

At Rayvat Engineering, we provide end to end solutions for your Architectural Visualisation, Animation, and CAD drafting & modeling services.

 

Our team of 29 experienced Drafters, 3D and Multimedia artists has enabled professionals ranging from Architects, Brand Managers, Product Modelers and Engineers gain a competitive advantage in their respective domains.

 

We provide services across the following domains:-

 

a.       Architectural Visualization

3D Bird's eye View, 3D Aerial Views,  3D Interiors, 3D Exteriors, 3D Floor Plans and Landscape Mapping and Visualization.

 

b.      Architectural Animation    

3D Virtual Tour, 360 ° Virtual Reality, 3D Walkthroughs

 

c.       Drafting & Modelling

Revit Modelling, PDF/Image/Scan/Sketches to CAD conversion.

 

For more of our portfolio, please check the below link:

Website portfolio: https://www.rayvatengineering.com/portfolio/

3d-rendering-services-germany.jpg

3D-Restaurant-Design-Rendering-Los-Angeles.jpg

Balcony-Design-in-Rancho-Cordova.jpg

Restaurant-Interior-3D-Rendering.jpg

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

  • Member Statistics

    27478
    Total Members
    6254
    Most Online
    Oilersfan20
    Newest Member
    Oilersfan20
    Joined
  • Similar Content

    • By chrisped
      I have a home design that I am working on in home designer professional 2020.  Would eventually like to get it completed and then a set of construction prints for Nashville, Tennessee.  whidh means I will need floor plans and elevation views as well as a plot plan.  I have the plot drawn with some contour lines in the drawing I have developed.  The house faces about due west (not the best but that is the lot I have.    I have attached a picture of what I want the exterior rendering to look like.  Looking for job bid.  The plan file is zipped and attached.  Following needs to get done and then a front rendering and the file returned with the updates.  (Can pay via paypal etc)  
      1. Master bedroom vaulted ceiling following rafters up to height of 12 feet then flat across.  House rafters will be 2x8 or 2x6 depending on span.  
      2. Fix the roof planes
      3. Shed roof with 2 in 12 slope over the back deck.  Extends out about even with the master.  This is asphalt shingles.  Ceiling will follow the rafters
      4. The peaks (side and front larger dormer) should be board and batten not sided, the rest of the house sided, the foundation walls are stone
      5. Make sure chimney carries through to the roof from fireplace in family room.  Chimney is stone where it can be seen outside of house.
      6. The basement foundation walls connecting to the crawl space (unfinished area) should be only 5' tall (it would just be in one area)
      7. Front porch is to have a metal roof, rest of house is asphalt shingles (charcoal color but not black)
      8. Stairs should be 42" wide and should be fixed . Want them closed underneath. Somehow I cant get this to look right
      9. Need a front rendering showing view of the house for presentation to client
      10. Need file updated to reflect these changes and has to be readable with Home Designer Pro 2020
      11. Floor deck for both the first and second floor are 11-7/8 TJI with 3/4 subfloor (I think I have this right).
       
      At any rate, looking for quote to get this done.  Thanks for looking.
      House Design Front Walkout.zip

    • By Texas_Chief_Pros
      Tutoring Services Architectural Drafting and Detailing Reinforced Concrete Drafting and Design Structural Drafting Services Architectural Presentation Drawings Floor Plan Drafting Services Landscape CAD Drawings Services CAD Conversion Services Kitchen and Bath Remodels 3D Design Services Rendering Services Tiny Home Design







    • By Omarlie
      Offering my services for Resdential,Commercial and Office spaces.  

      Specialise in  :

      •New Developments,•Multiple Family/Single Family Homes, •Commercial Property ,•Renovations ,•Townhouses, •Mansions, •Residential Houses, •Apartments •Buildings etc. done here.
       
      Our Architectural &Structural Construction Drawings List entails:-
       -Site and Location Plan
      -Ground Floor Plan
      -Electrical Plans for all floors
      -1st Floor Plan
      -Roof Plan and Detail
      -Foundation Plan
      -Structural Drawings
      -Plumbing Plan & Isometrics for all floors
      -Septic Tank/Soak away Drawings
      -Elevation -North and East
      -Elevation -South and West
      -Section X-X
      -MISC Details-Railings etc.
      -3D Realistic Renderings
      -Estimate
      Get your dream home today!
      Facebook page : 
      https://www.facebook.com/IAGArchitectsLtd1
      Clients reviews on our page.
      Thank You very much.
      Done by IAG Architects Ltd.
      Contact 1-868-266-2444,1-868-487-1973























    • By GCCISarah
      Hi everyone-
       
      In the last several plans I have created in chief X11, using a Camera View with a Reference Display of the As-Built, I have the As-Built Reference Display file set to render as a Glass House view. The Glass House referenced model displays, but without any of the dark outlines to show the features of the model. I have included an image of a remodel I am working on currently, where the referenced As-Built shows as a faint blue shape. Nothing like the examples Chief gives of a reference display, below.
      Any thoughts on what setting I might be able to change to get the 'outlines' back. I have also included an example image from Chief I found online, which has the desired 'outlines' in black.
      This does ONLY happen when I'm using Glass House View as a *Reference Display* in the plan I'm working on. If I were working on a plan and change the rendering technique to Glass House, the outlines are visible. This only happens in Reference Display.
          
       
    • By GCCISarah
      Hi everyone-
       
      In the last several plans I have created in chief, using the reference display in a 3D view (referencing an as-built plan overlayed onto the remodel plan) with Glass House View, the Glass House View is very transparent, with no 'outlines' around the items in the drawing.
      It makes it quite hard to see what the existing vs. remodel.
      Any thoughts on what setting I might be able to change to get the 'outlines' back. I'll attach a photo of a kitchen I'm working on currently below, showing how faint the Glass House View is, vs. an example photo from Chief I found online, which has the desired 'outlines' in black.
      This does ONLY happen when I'm using Glass House View as a *Reference Display* on the referenced plan. If I were to delete the reference display plan, and just change the rendering technique of the Plan file I'm working on to Glass House, there is no problem. The 'outlines' show as desired.