BrianD

Members
  • Posts

    13
  • Joined

  • Last visited

Reputation

0 Neutral

About BrianD

  • Birthday 12/08/1937

Profile Information

  • Gender
    Male
  • Location
    Macleay Island Queensland Australia
  • Interests
    family /woodwork / fishing
  1. Rene & Lew Thanks all for the reply's I will take this on board and see what happens.I hope one or the other sorts it out, its hard to know who is at fault here, Google or Chief Best Regards Brian Dominick Engineering & Architectural CAD Detailing Australian Institute Of Steel Detailing
  2. Good day all Has anyone had any issues with X9 & using Google Drive backup causing freezing & crashing Best Regards Brian Dominick Engineering & Architectural CAD Detailing Australian Institute Of Steel Detailing
  3. Thanks You Eric I will try that Best Regards Brian Dominick Engineering & Architectural CAD Detailing Australian Institute Of Steel Detailing
  4. Eric Thank you for the answer. I realize now that I have not asked the question correctly. I should have asked can a railing wall be sloped back 3 degrees. Best Regards Brian Dominick Engineering & Architectural CAD Detailing Australian Institute Of Steel Detailing Chief Arch Ver X9
  5. Good day all Does anybody know how, if possible, to slope or lay back verandah posts 3 deg (perpendicular to roof) Best Regards Brian Dominick Engineering & Architectural CAD Detailing Australian Institute Of Steel Detailing
  6. BrianD

    Round logs

    Thanks Michael & Javatom I will check that out this morning. Big help & Thanks again Brian Dominick
  7. Hello All Can round logs be used to creat rafters & beams Can a truss be made using round logs Thanks for reading this Brian D Using Ver X8 . Win. 8.1
  8. Bill Thanks for your reply. What you recommend was as I had chosen myself.So looking further I looked at the "wall type definition box" and noticed that I had one wallboard layer in with the main layer area with the air cavity layer. Moved the wallboard down and now ok. Sometimes just asking gives one a wake-up call. Thanks for your help Brian Dominick
  9. Can someone clear my head about this . To dimension External & Internal wall frame only without wall layers , what selections should I make in the diminsion defaults dialog box. Thank You Brian Dominick Chief X7 Win 8.1 SSD
  10. Tommy Thanks but the plan has changed & the cabinet has already been deleted and cook top is still hanging in mid air.& will not select Brian Dominick Macleay Island Queensland Australia
  11. Hello I have a cook top which will not select or delete. It is in the layer ( fixtures Interior) & is not locked. Any ideas Thanks Brian Ver X6 Win 8.1
  12. Thanks Kbird1 I was actually doing all as you suggested, except I was creating the gutter on the floor plan view, so I created it on a new plan as you suggested and it seem ok. Thanks for your help Brian
  13. Hello I have changed a gutter profile to a box gutter profile which i created 150mm x 400. I acn apply this gutter OK, but if I make any change to the roof plane., the gutter reverts back to the original gutter every time. How do I stop this Thanks if you can help Brian Dominick Using Ver 6 Win 8-1 64bit