Fotis1960

I have it on CA16

47 minutes ago, DBCooper said:

You can try using the "reset to defaults" tool and check the box for "roof directives".

 

It worked. Thank you.

I have a fairly complex floor plan and after having auto build a roof I had to make some(lot) of manual changes. Changed some to gable and some to hip. Somewhere along it roof got pretty messed up. When I delete all the roof planes and try to recreate it I get the same messed up roof. Is there a way, after I delete all roof planes, to reset all the walls back to default so I can auto build roof again like it was before all the manual changes.

On 12/4/2024 at 6:40 PM, DavidJPotter said:

Thank you

I want to add an addition to a As Built plan that has a roof that was mostly manually created. I believe I saw a video of a way I can use Auto Roofs on the addition without changing the manually created ones, but I can't find it. I believe there was a setting for the manually created roofs so they are not changed. Can anyone either tell me how to do it or point me to the video. Thanks in advance

On 5/22/2024 at 6:01 AM, Mark3D said:

I had a play with your file i made some changes 

I put a roof hole in the large roof plain front and rear gables

facia heights on large roof plains i made sub facia 15" and eave facia 16" also turned on boxed eaves

I put a molding for deck facia

I made stair floor open below

 

See if that is what you can use, I think the roof pitch should be stepper like 12 in 12 from looking at your photos

1996198547_WendelOPHouseAsBuilt.plan 7.94 MB · 12 downloads

Thank you. This helps a lot.

19 hours ago, Mark3D said:

From looking at your plan and photos it seems like you are on the right track, was there something in particular that you would like to improve on

How do I increase the size of the fascia, and not as important since the plan is just to use it for reference for the addition, how would I use a real dormer instead of the false roof gable?

This is how far I've gotten. Does anyone have any suggestions to get it closer to the actual pictures.

Wendel OP House As Built.plan

Thank you for the video suggestion. That got me to layout the shell of the house. Unfortunately the false gables are just that. No room inside. This house has a second floor (loft). Would like to get a more accurate drawing.

Help needed

I'm a casual user and can't figure out how to build this roof. I want to build this house as an as build to add an addition for a friend. The roof is just beyond my skill level, so any help would be appreciated. I have added pictures of the front and back of the house. Thank you in advance.

10 hours ago, SHCanada2 said:

i think that is only the case if you navigate to it using the little arrows, and not clicking on the catalog? ..or at least that what happened when I tried it.

 

once I click on any other catalog it shows in the filter. so how did you click on something without clicking on the catalog it is in?

 

Yes, you can open a catalog without clicking on it if you just click on the arrow next to it.

9 hours ago, SHCanada2 said:

I think that is by design, if I click on an individual item, I already know what I am on so i do not need it to show in the filtered results. the filtered results look like anything other than a click on a individual item

Ok, but when you click on a catalog and all the items show in the Filter results, if you click on an item in a different catalog, it doesn't change. The items from the first catalog still show in the Filter Results. If this is by design, I just think that the way it was done in past versions is better and easier to view items.

Is anyone else having an issue with the Library Browser in X15  When clicking on individual items they are not showing up in the Filter Results. If you click on the catalog all the items in it display but if you click on an individual item it doesn't display. I remains showing all items in full catalog.

Has anyone else had this issue? Is it a know issue with X15 Beta?

Thanks for the explanations. Now I understand the manufacture issue.

5 minutes ago, Alaskan_Son said:

 

You have me curious where you were expecting the manufacturer name to come from.  Can you expand on that?  Were the cabinets or their doors/drawers pulled from a specific manufacturer catalog that you were expecting would be automatically recognized by the %manufacturer% macro?

The cabinets I have are from the Manufacture Catalog (Aristocraft). I just thought Chief uses that info to auto populate the field.

5 minutes ago, DBCooper said:

The %manufacture% macro just displays the info that you put into the "manufacturer" object information.  You have created an endless loop but apparently Chief already anticipated this and doesn't blow up.

 

So yes, you will have to manually enter the manufacturer name for all of your cabinets.  If you are using the same manufacturer for all of them, just group select them and type it in once.

 

There are also a whole bunch of manufacture cabinets available in the downloadable libraries.  

https://www.chiefarchitect.com/3d-library/

 

The cabinets I have are from the Manufacture Catalog (Aristocraft). Chief doesn't take that info and auto populate?

1 minute ago, DBCooper said:

Just like I thought.  So when you want to use a custom counter, you don't need to set the cabinet lower and turn off the automatic counter.  Just draw the custom counter over it.  It will replace the automatic one and it will be the shape you make it.

 

 

Oh, got it. I was unchecking the auto counter top and then adding the custom.

Thank you.

17 hours ago, DBCooper said:

 

In Chief, the cabinet "height" is always the box height plus the counter top height.  If your cabinet schedule is showing two different heights, then you have probably done something that you don't need to (like making one cabinet shorter).  You don't need to make your cabinet shorter to use a custom counter top.  If you just draw the custom counter over the top of a base cabinet the program will use your custom counter instead of creating an automatic one.  If you want your cabinet schedule to show the "box height", all you need to do is remove the "height" column and add the "box height" column.  If you actually want to build all of your cabinets at 35" instead of 36", then just set the cabinet height to be 35" and your counter top thickness to whatever you want.  If you set up your cabinet defaults this way, then it shouldn't matter whether your cabinet has an auto counter or a custom one.

 

 

You don't put %manufacturer% in the object information.  You put the actual name of the manufacturer, like "KraftMaid" or "Wellborn".  You can use %manufacturer% to extract the manufacturer name when you want to put it into a label or a custom macro.

 

All of this is just my best guesses, if these don't help you solve your problems, then I recommend that you post a plan (as suggested by Eric).

 

Thank you for the response. Using the Box height works. Just interesting to me that the schedule uses the total height (cabinet and Counter top) if its an auto counter top but only uses the box height if its a custom counter top. I think its confusing since you end up with two different heights.

As for the manufacture name, isn't the macro %manufacture% supposed to auto fill the name in the Manufacture column? Do I have to manually enter the name on every item ( every cabinet)?

Thank you for the responses'. I have downloaded the plan.

Ocean City Condo Remodel Steff Option 1.zip

I'm a causal user so maybe I'm missing something but, on cabinet schedules it lists the cabinet as 36" including the counter top. Typically cabinets are 35". But if I use a custom counter top the cabinet is 35", which is the correct height. So on the schedule I end up with cabinets that are 35" and 36". Is there a way to set the correct height of the actual cabinet when auto counter top is checked  so all cabinets are consistent?

My other question is why isn't the Manufacture not filling in on the schedule? It shows %manufacture% which is the correct macro entered in the object information.

schedule question.pdf

Thanks for the suggestions everyone.

14 hours ago, Renerabbitt said:

Many different ways to do what you are asking in a sense but it depends on what your desired end result is. WHY are you trying to join rooms? is it for the room label? is it for an elevation camera you are trying to detail? Is it for a crown molding you are trying to continue?
The why will give us an approach for answering you as this is an unusual request on its own

Main reason was to get one material list for both rooms, but I think I can get it using the Material List Area, although using that wont list the door or trim to the bathroom.

How do I combine two rooms into one? I have a bathroom with a shower that is separated by a a pony wall with glass top. Currently the bathroom and shower are two separate rooms. Can I combine them so they are one room? I have X14 on Windows 11.

9 minutes ago, Renerabbitt said:

Turn your sun off and see if it goes away..that'll start you in the right direction of troubleshooting the problem

That worked. Thank you 

8 minutes ago, TheKitchenAbode said:

Looks like the duct material has been set to be emissive, if so set it to zero, non emissive.

I don't have that option, or at least I cant find it in the Define Materials.