skirby19

Thank you. Unfortunately that's not it. I've never messed with any these settings before. It just suddenly started doing this. Here is a video. The screen capture doesn't show the "Adjust Sunlight" menu. But in this video, I am adjusting the tilt and direction angle of the sun. You will see the shadows not showing on the house like normal. And when I ray trace, the shadows are really overly dark. I'll keep troubleshooting to find out what happened.

I open plan in 3D view as normal. The sun shading is not showing. I manipulate the setting but its not showing the shadows. it's tough to explain. It shows once it ray trace. I've never ran into this before. It's doing this on all my project files.

Any ideas?

I have black windows. It's correct on a standard rendering, but not when I use ray trace. What setting am I missing?

3 minutes ago, solver said:

 

Please update your signature by clicking on your user name at the top right of the page, click Account Settings, then Signature on the left.

 

Thanks

Thank you. I had it correct on my profile. I did not know it needed to be done there too. Thank you for showing me.

7 minutes ago, skirby19 said:

Thank you. I am searching for that. What tab is "General Plan Defaults" under

Edit>Default Settings...?

Sorry, I found it. Edit>Default Setting>Plan

Thank you

Thank you. I am searching for that. What tab is "General Plan Defaults" under

Edit>Default Settings...?

I deleted the LIVING AREA SF. This has came up over the years and going through the "Plan Check" has always been the solution. For some reason I can not get it back this time. Please help me figure out my mistake.

I tried to upload the .plan but it is over the 14MB limit

I'm using X14

Thank you

Yes I did. I could not find how to do it. I only need the eave flush on the front, not the sides.

Trying to figure out how I can change the look of my boxed eave.

See the example picture. I need the boxed eave to be flush with the column and arch.

Any help is grateful.

I found it. For anyone wondering. I right clicked on the object and then opened the symbol and played with the "x" rotation.

Sorry I tried to upload the sample file but it gives me a (Error code: -200)

I have done it before and can not figure out how I did it. What are the steps to rotate a shutter, so it shows open from the bottom. So the bottom should be off the house about 24" and the top is still on the house.

Wow! Thank you. I knew it had to be something so simple. Just needed another set of eye. Thank you

Sorry, I thought I did. It's 16mb and says 14mb is the max to upload.

1213846195_Lot59DestinPointe2.plan

Sorry, I thought I did. It's 16mb and says 14mb is the max to upload.

My floors are all out of whack. lol

Please take a look and see what I am not seeing wrong.

1st FL - 96"

2nd FL - 120"

3rd FL - 120"

All floors 16" floor trusses

It's like it's missing a floor or combining floors.

This is the error it just gave me.

Yes, that was the first thing I did.

I just upgraded from x11 to X12. After I open a file, it crashes every time click on anything.

Please help.

My 1st Floor "Living Area" label is missing. I can not find how to bring it back.

I need to somehow delete the railing above the entry stairs without moving the 6x6 columns.

Plans_-_Lot_65_Destin_Pointe2.plan

Ok that does work and yes it moves about 50% of the doors, electrical...Hopefully this doesn't replicate in the future. This is a first.

Update:

I get this error when opening the file now.

c:\p4sync\dev\releases\21\chief\camodel\plan\document.cpp(3361): Warning #272032643

"1080 object(s) are too far away from the origin in "Site Plan2.plan". You can delete them, or try to move them closer to the origin, but they will not keep their position relative to other objects in your plan."

2/3/2020 10:07:49 AM

Build: 21.3.1.1x64

Thank you for the tip. Plan attached here.

Site_Plan2.plan

X11 Build 21.3.1.1x64

When in 3D view, the materials within the walls/roof show. Some kind of a glitch and I can not figure this one out. Attached is the file. See if it does the same for you. Let me know if you can see what I may have inadvertently done.

Thanks for the help. -Steve

Update: Trying to upload the 12mb file and it gives me this error...

There was a problem processing the uploaded file. -200