MichaelJerome

Check the file yourself - Not sure what I am missing.

Megale North Plan 2.7.2020.zip

Yes - Did as you outlined above and this is still what I see.

I tried that on the first floor invisible wall and that didn't work for me. I still see the house wrap from the inside view.

I have house wrap appearing in my living room where the ceiling is raised from 9' in the dining and kitchen to the living room where the trusses create an 11' ceiling. I am not sure how to add the drywall to this lower area so my RES Check will not give the TBD for description for the wall. Can someone look at the attached plan and see if they can determine the fix?

Thanks, 

Megale North Plan 2.7.2020.zip

Dang it - Soo Close - Trusses numbered 15 are not snapping even though they have the energy heel selected.

Megale North Plan 2.7.2020.zip

Perfect - Thanks SOOO Much!!

Here is the file - Let me know what you can see.

Megale North Plan 2.7.2020.zip

I did rebuild the trusses on the home twice with not luck in them snapping to the overhang or eave outline. The garage automatically built the roof trusses correctly. The plan file size is almost 30MB - I can try to save to a zip file.

I have not had this happen before when building a roof. My trusses are not following the overhang that is showing as well as protruding from an attic wall where the framing is not building. It seems to have worked on the garage as you can see from the image. What am I missing?

I went back into my defaults and found the errors in the default settings - I corrected them and now I can click on Edit>Reset to Defaults and it adjusts everything correctly. I thank you all for your help and will use this platform again as I appreciate the resource and input!!

Michael Jerome

I tried that with no luck. I have been going to each room on the first and second floor and selecting the default wrench icon or manually inputting the correct number for the ceiling etc. I think I have everything back to original but would appreciate any help if you all see something strange in the updated file I have attached.

Megale Center Plan 2.7.20.zip

I removed the radio button selection "Hang Floor Platform..." and rebuilt the knee wall and that worked!!! Yeesss! Thank you!

Any thoughts on the drywall separation from the floor trusses? I look forward to suggestions from the file I attached.

Michael Jerome

Here is the plan file - Thanks for the suggestions so far. I will be out of the office until around 12pm MST and will see what you suggest.

Michael Jerome

Megale Center Plan 2.7.20.zip

I have asked this question on Facebook’s Chief Architect page and no one can figure out or help with what I am seeing. I can’t adjust the knee wall height unless I click and drag each piece of lumber individually. I did this once and then rebuilt framing for another wall and it rebuilt this to what you see in the image. I also had all the ceilings correct and then found them separated from the floor trusses today and the floor/ceiling heights are off. I tried the Edit>Reset to Defaults and that didn’t adjust them. I am not sure what is going on but I am definitely not intentionally doing this. I found it like the images below as I am placing everything into the layout pages and several areas are messed up. Any ideas?