-
Posts
32 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by RSdesignvt
-
Two Questions, First - Can I eliminate the Insulation off my stem wall only? (Need below slab) Second - I have a cellar opening from the garage, and I want to eliminate the step up to step down - If I lower the door height -8" CA doesnt do anything - I need the framing correct first, and then the stairs! Oh, X16 and I will give my system a whirl. RTX 3080 48GB RAM i7 3.8GHZ All that stuff works fine. Not a CPU Guru - I let my engineer son handle that. thx - R
-
Need to create pass through folding window
RSdesignvt replied to RSdesignvt's topic in General Q & A
Perfect! Thaks Everyone! Super appreciative! -
Looking to create this - I do need for a couple projects. Im finding these and doors are becoming more popular. I tried & could not find in search in the forums, Im using the language "Pass-Through" maybe someone can give me a link if it has different language attributed. (As is often the case I find) I have CA X15 PC Best, Robyn
-
Thank you! I am certainly not brilliant with learning this software (after 3 years) Ohhh th enuances! They can get me with hours of trying to figure out what I did wrong. And its nice to find support in lieu of critism! I am in utter shock and appreciation at 1981! That is the very nascent stage of autoCAD. I remember plotting lines with points back when I learned. Can you imaging doing this now! There is a level of appreciation knowing the vector software from the beginnings. So it does afford us a little bit of knowledge.
-
Okay - Can do - I need fenestration on temp dims when I do as-builts as I am always in remodel mode so the majority of my dims are interior spaces. I'm going to reach out to you for a training. I need to get this layout mess better, so If I can have someone walk me through page set up I would be happy as hell.
-
Do you ever do trainings? I love your set up!
-
Im not sure, I am unfamilliar with this. where can I get more help? Please understand, that this is very overwhelming to me. I am excited about the software - but even with all my training there are so many things that I cannot grasp. I went to college in 1992 - we didnt have this stuff then. I learned autoCAD on DOS. I know younger folks like to **** on us older folks, But we still got it done without 3D - I am excited about the 3D make no mistake - But so many other levels to add into it!
-
Two messy views! Egads!
-
Whoaaaaaaa! That was amazing! THANK YOU! My dimensioning looks nothing like that! Its always a mess, and I have had help a number of times. But getting things to layout as well, I would love a group send of elevations. Im posting pics in a second!
-
I started with CA X12 and am currently on CAX15 - So it’s only been a few years (Winter 2020) However, I came from an entire career in AutoCAD -- (Hated Revit & AutoCAD 3D was just horrible) I lived in 2D world from 1992 to 2020, and also am adept at hand drafting & Illustrations. With that said - I LOVE CA - it’s been a game changer for me & happy I switched. (Very) HOWEVER - taking my drawings to layout is incredibly cumbersome. Dimensioning is always difficult having to eliminate dimensions, get dimensions I need. I spent a fortune on training and my defaults are fine. Dimensions are always messy. Also, just the sheer volume of fidgeting and getting things to layout, notes, schedules etc. I have a lot of additions versus new builds as I am in New England with old housing stock, very few new builds and every single project is unique. I would love tried & true tips on how to make plan to layout easier. I already have a default template; I change plan defaults for each project. I'm just finding that this is the largest loss for my company because the sheer time it takes to move a plan to a layout can be more than the design. In AutoCAD I just drew the elevations, dimensioning was simpler (Making sure it dimensions correctly CA drives me bonkers lol) I am very happy with CA, just need help getting things to layout - so if all you sage users can share your best time saving tips I would very much appreciate it! Please scroll by if you are just going to put me down.. Ive done many many trainings, bootcamps, personal trainings etc. But I am older (50+) and sadly not the most saavy at new technology, and I am pretty patient with myself. Im just seeing the incredible amount of time it takes to get to construction documents. I would love screen shots on settings that make things easier too!
-
ohhhhh! Vermont checking in.... They are a must here! And theres nothing like sleeping on crisp cotton sheets air dried.
-
Thank you for this! Its much appreciated! So much support here. I often forget!
-
Cool beans - Got it! I made this door to reflect the doors (4 panel primed shaker - Brosco) So..... Always some little nuance I'm missing it seems. Thank you kindly!
-
This is the plan Per Client
-
This will work just fine - Getting a weird shadowing on it though. The elevations still show a square opening. Built in closets under stairwells are not uncommon. So its odd that there isnt a great capability here, if I were to do cabinet models I would polyline / Hole / Extract. I just need doors. Its for a laundry access. I will end up using a polyine box fill for elevations.
-
Understood, but in the scope the Contractor needs to be aware that this is a custom build, and the drawings should reflect so it is not missed. We all know what happens then!
-
How can I add the stairwell slope to built in doors under a stairwell - A contractor will be building these on-site. CA premier x15
-
Chief architect premier X12 I need to add a bay window to my sched. what's the work around since they cannot be mulled together. Its hard enough to create a custom bumpout to add one. Also getting RO's correct is challenging to say the least... Anyone have some sage advice?
-
Ryan Thank you! I'm very appreciative for the help!
-
V12 Premier
-
I'm trying to add leaded glass caming to a cabinet door, and have been unsuccessful. I have gotten as far as the cad block... However I cant switch to a metal finish to save and apply... I don't have the option to create as muntins. (I'm using a cabinet door from core catalog) Chief Architect V12 Premier
-
Hi all, Chief Architect V12 Premier Most cabinet manufacturers along with custom cabinet makers will not make a cabinet door over a certain height without adding a center rail. I am looking for a way to add a center rail to a cabinet door. Additionally I would also like the option if I did this to an upper cabinet door over a certain height that I can make the upper portion glass.
-
I set my outside wall heights and pitch. Exterior is exact. But I can't put a flat ceiling over the room as it shows up as the outside wall heights.
-
Cool Beans, I have used this template at least 12 times without a hitch. Where do I find the default set for Moldings? I thought it was under walls? And Its not.