40mstew
-
Posts
43 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by 40mstew
-
I did notice that if I changed the wall from the glass wall to a regular wall it fixed the problem for that wall. The exterior wall however is still the same. Plan file is attached. Stewart_2018_1-16-18.plan.zip
-
"All on set" is on. See pic. Still not showing. Any other thoughts?
-
When I do a camera view, why doesn't the area I have highlighted in yellow show? What is it in the layer display options do I not have checked?
-
Greatly appreciate all your input! All worked well in different ways. Thanks all of you!
-
I have a basement with a safe room. The ceiling is 10' high in the basement. I only want to drop the ceiling in the safe room that is in the basement down to 8' and keep the basement ceiling at 10'. Seems every time I try to do this it messes with the foundation and raises it. Not finding any videos on this. Or is it just as simple to turn a soffit into a ceiling??? There has to be a simple step by step solution to this. Using X9. Thanks
-
No, I made the change, and started making new lines and a 128th measurement popped up. Solver, I did turn on grid snaps and as of now it seems to be working, not getting anything over 1/16". Thanks!!
-
Whoops! wait, it didn't work. Still getting a 128th
-
Right on Chopsaw!! That worked! You're awesome! Thanks.
-
-
If I pull a cad line, then open the line spec box, the dimension will show a 1/64th or 1/128th.
-
that is what I have it set to, 1/16"
-
Using CAD to draw a line that is roughly 10" long I will get a dimension of 10 109/128 in the line specification box. I have changed what I know in preferences and default>cad, but still no difference. The smallest measurement I would like is a 1/16" of an inch. I have attached my file. Stewart_2018.plan_2.zip
-
Ha! I was focused on the wall and ceiling heights. Thanks again!!
-
Not sure as to why my ceilings are not showing up. I've tried adjusting, very confusing. Room specs box is checked and says "ceiling above". Ceiling defaults are there. "Structure" in room spec shows a pic of the ceiling heights. I am attaching my plan in a zip file because of it's size. Stewart 2018.plan.zip
-
I would think that you would have to give the drywall a color??? My two cents....
-
Yep, it worked!! Greatly appreciated!! You guys are Awesome!
-
Here is the plan. See the attached. Stewart_2018.plan
-
Never had a problem with this before. If I draw a wall that ends at the front of the shower, the end wall shows a stud with no drywall. I really don't want to have to draw a polyline solid, rename it on the layer, and paint it. Frustrating because I didn't have this problem just last week.