Vintageltd

Unless I'm not clear on your question, isn't this the function of the 'Transform/Replicate Object' button? If so, it's been in Chief for years. You click on a line (or point, etc), hit Transform/Replicate, specify X/Y/Z distances, number of copies, etc and whether to duplicate or move the line (or other object).

I updated X10 as per the instructions, and my missing textures reappeared. However, it seems that the "Pine" and "Cedar" wood material library categories have been removed completely in X10 release? As a workaround, I've imported those from X9. Thanks, Roland

Can confirm some issues here with beta->full x10 release textures. I'm missing most of the core catalog wood textures, along with some of the siding textures. Doesn't appear to be a pattern to what's missing (ie, 'Alder' is missing, 'Ash' is fine, 'Bamboo' missing). Running a catalog update didn't correct the issue. Roland

Thanks again to everyone who input on this issue, you were all very helpful. I raised the issue with tech support, and they've confirmed that they can reproduce it on their end. It's been submitted to development for a fix, so hopefully it'll be forthcoming in a future patch. Roland

I just updated my original problem construction drawing set to try this, and it prints perfectly, without any skew. In fact, I left both types of images on the layout page; the 'Send screen as Image' set, and the regular Live View set, on the same page. The 'Send as image' components print fine, however, the Live View ones remain skewed. Definitely something bizarre going on during the print process with the 'Live View' items. I had been thinking that it was just sending a large/complex image, but if the plain images are printing fine adjacent the Live View images which are not, and on the same page.... Thanks for all your input everyone, it's greatly appreciated. At least I have a temporary workaround until it somehow gets addressed in a more permanent fashion. Roland

Just for clarification, this is not just happening for me with PDF output... it's also happening when I try to print a layout directly to the plotter from within Chief Architect. I could live with it if it were just affecting PDF output. At least setting resolution to 72dpi fixes the problem in that case. I can't find a fix for my printed output, however.

And, just to further complicate the issue, I tried the problem layout on the Designjet at 11x17 instead of the 18x24 & 24x36 I was using before. No skew. So, it seems it's tied to the size of the print job, perhaps. Larger and/or higher resolution print jobs are being broken down into multiple regions, which is when the skew problem is showing up?

Now that the problem is clarified a bit, I spent some time experimenting with different print settings. For some reason, if I set the Designjet driver to 1200dpi, the skews are just slightly less obvious, though still certainly apparent. It's the only setting I could find which had any effect whatsoever on the problem. It all seems to indicate that what's happening is that Chief is outputting in print regions (ie, the blue boxes), and for some of us, or at least on some types of output devices, those output regions are somehow getting misaligned. Hence the 'skew'. I never thought to try earlier, but just attempted a printout on my HP laser printer... surprise, no skew. The layout giving me grief on the Designjet and PDF look just fine when output at 8.5x11 on the Laserjet. The bizarre thing is why it doesn't occur at 72dpi for PDFs, but it does at every other resolution. And at all resolutions on my Designjet. At this point, I'm out of my depth on this. I think it'll need input from someone like Dermot at CA.

This confirms Chopsaw's experience, that the skew lines are aligned with the blue panels shown in your pdf screens. Chief must be outputting to the Designjet T520 identically, which is why I'm experiencing the same problem with my printed output. The skew lines are positioned exactly on my printouts as they are on the PDFs. Annoying!!

Interesting, Chopsaw... just for the heck of it, I tried setting the DPI to 72, and it works... the skew/slice is gone. This would seem to point to a Chief rendering engine issue somewhere, at least for some systems? Of course, the 72dpi 'fix' doesn't help the problem of outputting to the Designjet, unfortunately.

Thanks for the input, guys. As an additional update, I just reset my video card (GTX960) to all default settings, no change. Then did a complete uninstall / reinstall of the driver with completely clean settings, again, no change. It's a very weird issue. Everything seems to point to a video card or driver issue, but I would think that the problem would show in the displayed image if it were a card issue, not in the printed (or PDF output). On my screen, everything looks fine in the layout. It also seems bizarre that layouts from a week ago are fine.

Hey everyone, back again with yet another bizarre anomaly over the past couple of days. While printing the layout for a construction set, I noticed what I initially thought was a printhead alignment error on my Designjet. After some examination, it turns out that most (but not all, go figure) images on my layout pages have 'distortions' in them. It only seems to affect Live View images sent directly to layout from within a plan (ie, "Send to Layout" from a camera overview / etc). Render technique seems to not matter, it affects 'Standard', 'Vector' & 'Technical Illustration' modes equally. Images imported onto a layout from external JPG/PNG files will print fine, even saved raytraces from within Chief. Floorplans / elevations sent to layout are fine, too. And it's not a printer problem, since it affects both PDF (Chief & third-party drivers) output as well as physical prints. I thought it might be a display driver issue (it resembles a 'texture tearing' issue, if you're familiar with video card rendering), but upgrading to the latest video drivers has no effect. And, onscreen, everything appears perfect. I thought it might be my layout template, but even using the unmodified Chief default templates show the problem (the attached layout is from an untouched template). Here's a test PDF of what I'm encountering; if you take a look at the lower-left image, it's most readily apparent.. it almost looks like the model is 'sliced' roughly midway through, with the upper and lower sections slightly offset. temp3.pdf As a test, I just copied a bunch of the same image, and positioned them randomly on the layout. You can see that the "slice" is not entirely consistent; it's positioned the same on each image, but is much more visible on some of the shots than others for some reason, at least on my system. (EDIT: Attached screenshot, better illustration of problem) Above, you can see in both shots a 'slice' through the slab. In this next file, I simply exported to PDF directly from the camera overview, without sending to a layout first. The image is normal. quickprint.pdf As mentioned earlier, onscreen everything looks fine. I'd have thought that perhaps a camera view default was messed up somewhere, but onscreen views are flawless. It's only when printing from a layout that the problem occurs, almost like the Live View is getting skewed when going to print. I've gone back through a project done a week or two ago, and layout output seems just fine for that, so this is a recent occurrence. I've discovered that if, from layout, I modify the camera from a Live View to a Plot Lines, the "shift" doesn't occur. But of course then the image switches to a standard vector view. So, it would seem to only affect Live Views (neither 'Update on Demand' or 'Update Always' make any difference). At this point I'm completely at a loss as to where else to look for a fix. I guess perhaps this might be an issue for tech support? Now, I have been doing some updates to my template plan over the past week, but I cannot image what I might have changed to trigger this problem, if anything. Exporting images to disk & then just importing those into the layout works, but it's a clumsy workaround. Not to mention that I lose the live update from layout ability. The test plan and layout are attached. Thanks for any suggestions. Roland ImageTroubles.plan ImageTroubles.layout UPDATE: Interestingly, it appears that different PDF applications display the anomaly differently... Foxit PDF shows the 'slicing' equivalent to what I get from printed output on the Designjet, but when viewing the attached PDF from within Chrome, the problem is significantly less visible.

Thanks, but that was the first thing I'd tried. I always run with gridlines off. Assuming you mean the reference grid, of course? As another update, I've figured out the mystery partially... it only affects vector views. After taking a closer look at the saved vector screenshot in another image editor program; initially, the gridlines in that editor were not visible. Until I started experimenting with the contrast, at which point they become visible. I switched the elevation view from vector to technical illustration, and the gridlines then don't appear in the saved image. So, it seems, at least in my case, that vector elevation views always have non-visible grid present. They're not normally visible, until you go to print of course. Or adjust the image contrast onscreen. Wierd. It may be a bug, since using an image of an elevation view is probably not a common thing.

Has anyone run into this before? I exported an image file to use in a layout (Export->Picture), and when printing, a grid shows on the image. It's almost as though it's showing a transparent background hatch pattern like you'd see in an image editing program, but the grid is physically there, as part of the image. And of course, it shows on the print. I even tried just taking a screenshot, and the grid still shows... even though there is definitely no grid displayed on the elevation. It's almost like the grid is invisible on screen, until you take a screenshot, and it gets "turned on" in the saved image. Thanks for any suggestions, I likely have a default set incorrectly someplace or some such. Roland EDIT: Well... for some bizarre reason, the mentioned gridlines don't display on my uploaded image. I'm really confused now. They print on two different printers, display in a PDF, and show up in any image editing program I try. They even display in Windows Photo Viewer. Drag files here to attach, or choose files... Max total size 25MB Insert other media Uploaded Images

BAH, I knew it was something obvious. Thanks so much Robert!!

I've a very similar setup (X9, Win10 64-bit, GTX960), and just tested plant display in various camera views with no issues. Are you running the latest (or at least a recent) version of nVidia's graphics driver? There was a new release just yesterday I believe. I'm not sure what else the issue could be, particularly if it's not an issue in X8 for you.

Hey everyone; I've been going through some framing learning, and am obviously misunderstanding something (or have a default set incorrectly) in relation to headers & openings (at least in regards to auto generated framing, that is). I've never really used the framing functions before, so this part of CA is new to me. In the attached example plan, I have four differently sized window openings, with framing having been auto generated. From what I thought I knew, each of these openings should have framed with different size headers, based on the 'Opening' settings in the framing dialog. However, they all generated with 5.5" headers. Is this a known issue, or am I just doing something incorrectly; I've a strong suspicion I'm overlooking something simple here. I did a forum search, but couldn't find anything related. Thanks for any guidance, Roland Framing.zip