DARYL178
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by DARYL178
-
-
Hi Drawzilla,
Could you elaborate how to do the CAD lines? I have an action on my plan to specify wall panel bracing. Based on IRC, I was going to use the continuous wood structural panel sheathing (OSB) method for the entire barn. In my plan, I am using Stucco-6 siding which contains that sheathing layer; but I do not know how to show that layer only or use CAD blocks (with the OSB Horizontal block from the library). Since my walls are 10 ft, I need to shoBarn2017_Rev1.planw the direction of the panels.
-
8 hours ago, javatom said:
Move walls first then a line the foundation under it. Then move the roof plane. Some things will move with the wall like windows and doors. Sometimes there's a items you have to move manually like furniture and objects.
After I think I followed your steps,
1. The external walls have been extended and moved
2. Framing didn't get rebuilt even though I have auto rebuild on
3. Additional trusses were added
4. Original Gable wall (with attic vent) is still in the original location.
5. Shingle roof properly rebuilt.
I have attached 3 pictures to show the above 5 items.
3 hours ago, joey_martin said:Edit area, should move everything at once.
I tried the Edit Area (all floors) with no success. Only the bounded area is enlarged; but no framing, foundation, or roof is modified.
-
I have a plan for a barn (30'x40', external 2x6 framing, 4:12 shingle roof, stucco) complete. I would like to extend the building by 10' on the farthermost wall away from the single entry door which is the left wall in plot plan mode. When I try to extend framing, foundation, etc, I begin to get big disconnects everywhere and missing walls. Could anyone explain the proper steps to perform this so I do not end up recreating all of my work?
-
Hi Jared,
Let me try the attachment again. The key need is the plan to be modified/generated for Maricopa County Arizona.
Thanks,
Daryl
-
Need a Chief Architect X8 expert to help finish a detached garage plan. The attached plan needs these items:
1. Roof re-done for a 4:12 pitch
2. Site plan generated
3. Foundation plan with proper elevation (18" above grade) for a monolithic slab.
4. There is no electrical/plumbing
5. Framing plan
Replicate Picture for Ceiling Bracing Gable Endwall
in General Q & A
Posted
An action from the inspector was to add gable endwall bracing to my plan. The choices I think I have are:
1. Import an image.
2. Create a lot of CAD lines.
3. Create a text block
I know this is a common detail to add; so I know I am missing something.