I am trying to create a story and a half main house that has a two story gable roof addition. I have been able to create the story and a half with a 1 story addition but can't figure out how to add a second story to the addition. The main part of the house has a 10/12 roof (created by build roof options: move roof up 12', ignore 2nd floor). The goal is to have the main roof 10/12 and the 2 story addition a 6/12 gable.
Pics below are a quick mockup. One showing the successful story and a half w addition. The other a bit more unusual configuration that I may not be able to get past the building inspector.
Thanks in advance for any help provided.
I currently have a remodel to an existing home. I am a General Contractor. I need someone to take some PDF's and DWG's and turn them into an existing plan, plus add to it the proposed remodel. Needs to be ready for submittal to Kootenai County, ID for permitting. I can send you plans for review. I would like to reach a flat rate fee plus an hourly for revisions if necessary. I am working in CA X12 and would like them in that format for ease of transfer. Please give me your availability as I am looking for someone to start very soon. Thank you.
House plans, original.pdf
Summary: We're creating a vaulted tray ceiling in a house that started as a double-wide mobile home. I want to model the existing "trusses" so that I can figure out how to do the rafters to frame out the new ceiling. I cannot figure out how to do this though.
This house started out as a double-wide mobile home. It's been remodeled several times, huge portions added, walls rebuilt in places, rooms moved, walls removed. But the roof structure through the middle of the house is a 2.5/12 pitch, framed as follows: 2x2 rafter, 2x2 joist, 16" OC, with 12" pieces of 1/4" paneling used as gussets every 12". The tall wall has 1/2" plywood as a ridge beam. I attached a drawing that shows each side.
I tried changing the rafter and joist settings to 1.5" x 1.5", but it insists on building roof framing with 6" rafters floating above the walls, and framing the tall wall with studs that are in the room wall below.
I tried to manually draw the framing in like the CAD detail drawing I attached, but I can't figure out how to rotate the 2x2 rafter to the 2.5/12 pitch angle. I figured I'd draw one "truss" manually, and then replicate/copy it across every 16". But after about 6 hours (admittedly I'm new to this app) I still couldn't figure it out.
I put both sides together, and added the 2x6 rafters and 2x4 cross brace. Then we plan to cut the trusses back flush with the rafters and brace. The wall will be coming out of the middle. There's no code here, unincorporated county, so no building inspection to send this through.
Is there a way I can take this CAD drawing and use it for the actual rafters - extrude the 2D shapes into 3D?
Tutoring Services Architectural Drafting and Detailing Reinforced Concrete Drafting and Design Structural Drafting Services Architectural Presentation Drawings Floor Plan Drafting Services Landscape CAD Drawings Services CAD Conversion Services Kitchen and Bath Remodels 3D Design Services Rendering Services Tiny Home Design
Design Associate for Residential Remodeling
Neil Kelly Company, a 70-year-old, family-owned residential remodeling contractor, has an opening for detail-oriented Design Associate in our Seattle operations. Our projects include whole house remodels, additions, kitchens, baths and residential retrofits related to energy efficiency, and more. Successful candidates with have experience drafting in Chief Architect / AutoCAD, materials research, taking job site measurements, estimating and project scheduling. Neil Kelly Design Associates are key to facilitating the design-build process, and must have the ability to draft and render with both the clients’ and builders’ perspectives in mind.
Check us out at www.neilkelly.com
Apply at www.neilkelly.com/careers/