BrianD

Rene & Lew

Thanks all for the reply's

I will take this on board and see what happens.I hope one or the other sorts it out, its hard to know who is at fault here, Google or Chief

Best Regards

Brian Dominick

Engineering & Architectural CAD Detailing                                 

Australian Institute Of Steel Detailing

Good day all

Has anyone had any issues with X9 & using Google Drive backup causing freezing & crashing

Thanks You Eric

I will try that

Eric

Thank you for the answer. I realize now that I have not asked the question correctly. I should have asked can a railing wall be sloped back 3 degrees.

Good day all

Does anybody know how, if possible, to slope or lay back verandah posts 3 deg (perpendicular to roof)

Thanks Michael & Javatom

I will check that out this morning.

Big help & Thanks again

Brian Dominick

Hello All

Can round logs be used to creat rafters & beams 

Can a truss be made using round logs

Thanks for reading this

Brian D

Using Ver X8 . Win. 8.1

Bill 

Thanks for your reply. What you recommend was as I had chosen myself.So looking further I looked at the "wall type definition box" and noticed that I had one wallboard layer in with the main layer area with the air cavity layer. Moved the wallboard down and now ok. Sometimes just asking gives one a wake-up call.

Thanks for your help

Brian Dominick

Can someone clear my head about this .

To dimension External & Internal wall frame only without wall layers , what selections should I make in the

diminsion defaults dialog box.

Thank You

Brian Dominick

Chief X7 

Win 8.1 SSD 

Tommy

Thanks  but the plan has changed & the cabinet has already been deleted and cook top is still hanging in mid air.& will not select

Brian Dominick

Macleay Island

Queensland

Australia

Hello

I have a cook top which will not select or delete. It is in the layer ( fixtures Interior) & is not locked.

Any ideas Thanks

 Brian

Ver X6 Win 8.1 

Thanks Kbird1

I was actually doing all as you suggested, except I was creating the gutter on the floor plan view, so I created it on a new plan as you suggested and it seem ok.

Thanks for your help

Brian

Hello 

I have changed a gutter profile to a box gutter profile which i created 150mm x 400. I acn apply this gutter OK, but if I make any change to the roof plane., the gutter reverts back to the original gutter every time.

How do I stop this

Thanks if you can help

Brian Dominick

Using Ver 6 Win 8-1  64bit