-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by SchnieppDesign
-
-
Well, things have still changed from the beta. I had just developed a plan in the beta and used the Pine 3 material. Now with the final version Pine is not even a group in the Wood materials.
John
-
For the last 15 years I have been working part time with a handful of small builders in the Harrisburg, Hershey, and Lebanon, PA area. My plan is to take down my shingle at the end of the year
I would like to find a designer that I can refer my builders to. Most of this work is additions, porches, etc. with an occasional custom home. This will require someone in the area to work directly with the homeowners to develop plans and construction drawings.
Let me know if you are interested.
Thanks,
John Schniepp
-
Thank you.
-
-
-
-
I am not sure how to construct a custom casing to do this, Perry. I have temporarily used a CAD mask to show it correctly in plan view. Of course it does not show correctly in a camera view. Your guidance would be appreciated.
By the way, in my drawing above, the outside of the window is on top. The opening widens as it comes to the inside surface.
Thanks, John
-
I am putting together as-built drawings for this 100+ year old house. The walls are 13" thick and the window frames taper from the outside in as shown in the attached drawing. I did this as a CAD drawing to show the situation, but I don't know how to model this window in my plan. I thought I remembered someone doing something like this before, but I can't find it.
Any help would be appreciated.
Thanks, John
-
Thanks everyone. Good ideas, and good suggestions for CA.
John
-
-
That's what I was looking for. Thank you!
-
Is there a mechanism for getting a floating dormer to cut through a ceiling plane. I am designing for scissor trusses on either side of the dormer, so I have the lower pitched ceiling inside. The floating dormer does not cut through this ceiling plane. Is there a way that is more automatic than manually working all the walls, etc.?
Any help would be appreciated.
John
-
Here is how I do it. Walls are normally drawn in a clockwise direction, and edit handles show on the outside of the main layer. So, in plan view for vertical walls, if the edit handles are on the left, the start is on the bottom and the end is on the top. If edit handles are on the right, it is the opposite. Similarly, for horizontal walls, if the edit handles are on the top, start is on the left, and end is on the right. If edit handles are on the bottom, it is the opposite.
Hope that helps.
John
-
Not sure what you mean by a roller door. But there are sliding barn doors in the bonus catalog that could be resized, if that is what you are looking for.
John
-
-
-
I am interested to know how you would deal with this issue. In the attachment the upper wall, which is stone in the center and stucco on the sides, is a single wall. The roofline gives the dormer look, but there is no dormer. How would you go about getting the different wall materials to show accurately. I tried breaking it into 3 pieces. I tried pony walls. Nothing seemed to work, so I just put a polyline solid in the center with a stone material.
Is there a better way?
Thanks, John
-
Wow, I started an interesting conversation. After experimenting, Glenn had it right. You have to enclose the stairs in a room. You have to make the walls invisible, open below, no ceiling or roof, and have winders on. If you check No Room Definition, it doesn't work.
Seems like a lot of trouble.
John (Scott - It is a German name. My grandfather arrived from the old country around 1870.)
-
Thanks, Larry. I thought there might be some trick with stairs. I tried winders and that didn't work. Landings is a good idea, but tedious.
Thanks, anyway.
John
-
x10 missing flooring materials?
in General Q & A
Posted
Eric - Yes, I have reported, but have not heard back. Will let you know what they say.
John