cliffy

I am using the reference display option when displaying a proposed addition. My issue is the reference display opacity in elevations camera shows through to the existing building, see attached image. Is there any fix to this? It displays accurately in camera view but as soon as I send it to layout is displays as attached image shows. Chief Architect Premier x14

Hoping someone can explain why this happen. When I generate a PDF or print, the color portion has diagonal light grey lines. They are not visible in layout only when printing and saving as PDF. Any help would be great! thx Survey 18 X 24 1234455.pdf

Is there a way when creating a 2 family residence to make the living are square footage display in reference to each unit instead of total living space? x9

Sorry guys I just don't get on here that often. This has been extremely helpful and I thank all of you for this information. This is an existing interior and I am not responsible for the choices in decor. I appreciate all the help on this.

This might help Compass Rose Room Layout.plan

attached is the plan , and an example of a 20 hr. raytrace. This plan was built for interior purposes only. pay no attention to the exterior. Any input would help. I am a rookie when it comes to retrace. Thx

Does anyone here know of a company (Or Individual) That will lend their retrace capabilities if sent a file (for a cost)? There must be someone that can produce a good retrace in less than 20 hrs....Thought my computer was pretty powerful until i tried raytracing... Using: CAx7 iMac (Retina 5k, 27 inch, Late 2015) Processor - 3.2 GHz Intel Core i5 Memory - 8 GB Graphics - AMD Radeon R9 M380 2048 MB

Does anyone here know of a company (Or Individual) That will lend their retrace capabilities if sent a file (for a cost)? There must be someone that can produce a good retrace in less than 20 hrs....Thought my computer was pretty powerful until i tried raytracing... Using: CAx7 iMac (Retina 5k, 27 inch, Late 2015) Processor - 3.2 GHz Intel Core i5 Memory - 8 GB Graphics - AMD Radeon R9 M380 2048 MB

I am building a house where the 1st floor system is recessed into the foundation. Attached is a CAD Drawing of what i am trying to accomplish. So far i have not been able to figure it out. Any insight would helpsss.pdf

I've got this far but can't seem to close the roof place without screwing up the ceiling.

Thats great Eric. How did you accomplish that? I am also trying to put 2 gable dormers in the steep roof plane. I am pretty new to this.

The upper section sits on top of the "Knee Wall" which in this instance is actually a full height wall

Attached is a CAD Drawing of the roof i am attempting to build. it has been a challenge so any help on how to automatically generate this roof would be great.

Attached is a CAD Drawing of the roof i am attempting to build. it has been a challenge so any help on how to automatically generate this roof would be great.

This is a home I intend to build. Dormer roof ties in below second roof plane.

I am attempting to place dormers on the steep roof section of a Georgian Gambrel house. I am having trouble with the ceilings (See attached pictures). Any help would be appreciated. Thanks

I have created 2 layer sets foundation detail, and plot plan set. i have built necessary components. when i go back to default set and edit a floor plan all me created layer sets vanish. HELP

Is there a way in X7 to remove the ONLY the bottom casing?

Is there a way to create a 9/6 window. Remodeling an old colonial and I am trying to replicate the existing windows which feature 9 lites in the top sash and 6 lites in the bottom sash.