JuneberryMarket

Here is the design in progress

I am working on eventually putting a cantilevered porch over this back patio. But, before I do that I am trying to get all wall heights the same. I have gone into default settings and changed the entire 1st floor to 12' ceilings. I am not seeing that they all are matching on the perspective view. Given the header height, it does not seem to reflect the settings I selected in default settings. Would appreciate your insight. Thanks, Rebecca MacBook Pro (16-inch, 2019) 2.6 GHz 6-Core Intel Core i7 16 GB 2667 MHz DDR4 AMD Radeon Pro 5300M 4 GB Intel UHD Graphics 630 1536 MB

Hello, I am working on getting only a portion of the basement walls done for a partial floor plan for a newly poured foundation. My struggle is getting the correct angle wall on the right side. I have the interior measurements here and are correct. The measurement 21' 6 1/8" should be 21'5". I manually pulled this measurement and do not have plans to determine the angle. When I adjust the angled wall to achieve the measurement, the walls that are near auto connect and change the measurement. And the angle changes too much at one time. Can anyone give some recommendations? Premier X13 MacBook Pro 12.6.7 Thanks, Rebecca Ortiz Basement .plan

I finally found it! Wall specfications, wall types, pony wall. Thanks for your help.

It sounds like that should work @rgardner! But, I am not seeing any changes when I toggle it on.

I am working on a remodel project of an existing home. There is an exterior wall here with the large room once a garage with staircase leading into the house and a little addition to the left. I am struggling to get the paint and texture to be the same as all the other interior walls within the room and the gable to be the same exterior lap siding. I have tried the manage wall coverings in the room specifications to get this far... I have also tried the 'add break' tool. Working with premier x13 on MacBook pro Thank you! Rebecca

I somehow changed the default settings for wall dimensions. When I change a wall length, it shortens and lengthens from both ends. I would like to make changes to wall size from one end only. Thanks for your help.

Here is the plan file. I am not sure what the wall DBX refers to? Thanks so much! Rod Kral II 2023_2023_03_14.plan

Are you able to see the photo I attached? Am I able to do auto roofs after I have the main roof layout? I do not want to change the rest of the roof lines.

Roof are not my strong point by any means. I have been struggling with getting this wrap around porch situated all day! I am using the manual build roof plane. On the Roof Plane Specification box, I am only able to lock one measurement which changes all others when I adjust the pitch and baseline and such. I have even tried to copy and paste the first side and rotate to the next side with no luck. Any tips or suggestions would be so much appreciated.