SueKurtzInterior

DBCooper and Chris ... THANK YOU SO MUCH!!! And thank you for the video!!! I fixed all you pointed out and a few more things I noticed. Interestingly, before I changed the General Wall Default to Outer (great save for a later problem I'm sure), the wall stopped overlapping. I think it had something to do with the custom countertop or the stile issue. I turned off all countertop and backsplashes on all cabinets and squared off the corner ... thank you for showing me that Chris ... I had done a work-around and it was only so-so. To get the backsplash across the lower cabinets only, I duplicated and reshaped the custom countertop and pushed it into place so that worked. ALSO, IT TURNS OUT, the lower half of the tall cabinet got crooked somehow and that was causing issues with the dimensions as well. My wall is still sticking to the cabinet, pulling it along if I move it, but it's in place and all is well. THANK YOU!!!

25 minutes ago, DBCooper said:

Like Chris, I am not sure what the problem is.  If you draw an interior wall next to the cabinet, it looks fine to me.  Maybe you can post of picture of the problem you are seeing?

 

On a side note, I noticed that you removed the left stile from your upper cabinet.  This will leave some holes in the left side so you might want to put that back.  You might also want to remove the splash from the lower cabinet as well.  Neither of these are going to be a big deal in an elevation view but they are noticeable from the left side.

Thanks for catching that DBCooper! I think I deleted the stile when I was trying to figure out something with the wall, and I DID remove the backsplash from the lower part of the tall cabinet, but I pulled a custom countertop across it and forgot it there! Appreciate the catch. But when I added it (and changed cabinet back to 36" ... it said 36-1/16??) it's sticking out now. Do I need it with the wall next to it, or what do I do? Other than learn cabinets better, which I'm working on. ;-\

Here is what I'm seeing with the wall. It's a 4.5" wall but overlapping something. The cabinet is showing as white and not part of whatever it is that tinted, but when I click on it, it's also overlapping. Re-attaching plan with wall.

2023-4-3 Davis Residence GB.plan

I'm still pretty new to Chief Architect, but I don't remember this happening before. This is a simple little bathoom plan and when I try to draw a wall next to the 36" full height cabinet, the wall overlaps and the measurement reads 4". My wall is an interior-4 wall, nothing special. I do have a countertop sitting between the base cabinet and the upper part of it (which I drew as a wall cabinet and just pulled down); it's a custom countertop and sitting right where it's supposed to, so I don't think that's the problem. What am I doing wrong? (plan for another ID and I'm just drawing it for her)

2023-4-3 Davis Residence GB.plan