jream20

That did it! Thanks a lot guys! You wouldn't believe how much time i wasted on that yesterday. 

I currently have something weird going on with my foundation wall, and I did not have this issue before i converted it from x9 to x10. There is a gap between my slab and foundation wall where I have the step down. I have tried deleting the wall and redoing it, and everything I have tried has not worked. Any help would be appreciated!

https://drive.google.com/file/d/1MiRKcuAEeiu9WF0pqDjpMHVWNk8_DdRu/view?usp=sharing

On ‎1‎/‎12‎/‎2018 at 2:52 PM, solver said:

I used 2 stair sections, one for the 1st 6 treads, and another for the remainder.

 

Checked Open Underneath, and drew in my own wall shown in tan.

 

Is there a way to make the rails connect on the left side?

I see! Thank you. That will make it much easier when I have to move windows

On ‎1‎/‎12‎/‎2018 at 3:13 PM, solver said:

Noticed you are using solids for exterior window trim and was curious why.

 

Is there something you want that standard trim will not do?

 

This uses standard casing with a Lintel. The lower piece is a sill from my library (1x6) but could be any size.

 

 

 

Also noticed your Gable Sub Fascia, or Gable Fascia needs resizing.

I need my top piece of trim to extend 1" further on each side. I couldn't figure out any other way to do that other than the way I did it

Thanks sir!

Google drive plan link

https://drive.google.com/file/d/1GVm6CxrF_cDE-03QTVgM_Su8MlLl9PoN/view?usp=sharing

Thanks Chopsaw. I uploaded the zip file

I have been messing with my first floor stairs since yesterday! I am trying to add walls under the stairs to create an opening for my basement stairs, while keeping my open rail for 6 treads.I also want those first 6 treads to be 4' wide, and the rest of the treads to be 3'7".  Attached is a picture of the area I'm having issues with. Thanks for the help in advance

google drive plan link

https://drive.google.com/file/d/1GVm6CxrF_cDE-03QTVgM_Su8MlLl9PoN/view?usp=sharing

Thanks fir the help guys! Have a great weekend

Correct, and that is why I have the weight st at 35. The problem I am having is that it is only making one side of that layer thick.

Hello,

I'm new to Cheif, and have only been messing with it periodically for about three months now. I am having an issue with the way my wall layers display in plan view. I would like my framing layer to be thick, and my drywall layers to be thin. For some reason only one side of the framing layer is thick, and the other side of the framing is thin. I'm sure there is a basic solution for this, but I cant seem to figure it out. Thanks for the help gents