Michael_Lewis
-
Posts
42 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by Michael_Lewis
-
-
I have version 10 and both corrections provided are on a newer version. I cant open either of them.
-
Thank yall so much. Im still learning the program to a large degree. I started another company a couple years ago and it is taking all my time so im barely drawing anymore and by the time i do i have forgotten half of what i have learned on this program. Thanks again guys.
-
I am having a hard time with these attic walls as well. I am including my plan and a photo of the desired look.
-
Got it thank you for the help!!!
-
The builder wants a 9' plate line with 10' ceilings and she loves the steep roofs so its 10/23. She wants to have the slope in the ceiling around the perimeter
-
Hey, I have a set of drawings that i am pretty much finished with. Upon printing the elevation sheet i notice the front elevation has a double line (looks like it could be a polyline) just under the windows. It carries through every step back and step up in the elevation but cant find it for the life of me and have never had this problem before. Please help.
-
Correct, the garage is but i would like to make both porches the same and its not letting me for some reason. I can make due with it though because i have noted it on the slab plan. I got the foundation under the column fixed thank you so much.
-
Ok ill work on the porch slab. The front porch, it had corners missing out of the slab so i used PL solid to fill in the whole lol. My biggest problems working this program is foundation and roof. I am getting the roof a little better but foundation is still kicking my butt.
-
I did what you said on the columns and made the invisible wall continues and there is still something in front of that one column in the 3d view. It wont let me pick it or do anything with it. I have no idea what it is. I have moved all the columns like 8 inches from the edge and that one still has what looks like a polyline solid in front of it but it still wont let me pick it.
-
I am fixing my signature also, to be more like yalls.
-
I have 9x premier so i am running the update now. Ill open the drawing once i have the update installed. I changed the walls on the collumns like you said. It will cost me a lot more work to delete my foundation and start that over because copy/paste my plumbing fixtures onto my foundation drawings and dimension them there for the rough in. Anyway, If i can get that column right i think i can make the rest work. I have sent the floor issue to Cheif also. They said that in the room specs>structure, i should be able to change all of those sizes. However, on mine it was like they were all connected. I couldnt change one without it changing the others automatically. They are looking into it for me. It will probably be fixed now that i am upgrading though lol. Thank you for your help.
-
I guess i havent updated my program yet either. I cant open your drawing but i know what your talking about with the room definitions. I havent gotten it the porch slab where i want it but I think i can get by with my notes on the slab plan to fix that. As long as it looks right on the elevations.
-
Wait i want the entire porch slab to be sunk 1-1/2" from the FF of the house. But i dont want it to have the stem wall around the edge of the porch higher.
-
Solver, I see the same. I just changed it and it took effect. I was changing it before and i would revert back automatically. Now it looks like it took. I still have a grey front on one of the columns on the back porch. It is even with the slab edge so im not sure why its pushing the slab out right there.
-
I tried to change the porch like what your saying and it kept changing other things when i did it. Like i said, i am sure its something easy. I just wasnt getting it. Ill look at it again
-
I am needing some help. I am still not great with this program. I have gotten fairly efficient but still have a lot to learn. I have changed my garage slab to 1-1/2" below the house slab. That for some reason seams to have changed the porches as well (mainly the back porch. I cant seem to figure it out and i am sure its something easy. Can someone please give me a hand here. I have included the drawings i have thus far. It wont let me post anything over 25MB here. I have to zip unless you have another idea.
-
I opened the pony wall and the thickness was set a 0. Not sure how that happened. I reset it at 4 1/2" and with a little repositioning everything fell into place. Thanks guys...
-
This is all that happens when i click on the triangle
-
Why would a room divider not connect properly to a wall. Same plan as above. trying to separate the kitchen, dining and living rooms. I have actually moved exterior step out wall as well to try to accommodate a proper connection and still not working. Screen Shot included too.
-
-
Need Help. Created a new molding but cant manipulate it. I created a soldier course molding and really like the way it works except i can Miter the ends or trim or even bring another layer to the front to cover it.. When you open the plan pull up the front elevation and youll see what im talking about. Ideas Please???
-
10/4 Thank you
-
Thats How i have done it every time. It looks different this time for some reason. Everything looks a lot better but i still have about a 2" step up in front of the garage before the sill plate step up of 1-1/2 inside the garage door. What are your thoughts on that?
-
Yes, I have it set as a monolithic slab. I guess i don't know how to set it up correctly. Here where I am 99%of the houses are Slab on grade so there are no basements or anything and Very seldom do I come across a new house with pier and beam
Attic Walls
in General Q & A
Posted
Its still not letting me open it.