cortssmith
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by cortssmith
-
-
All of the sudden when I draw walls or turn objects, they are not automatically snapping into place 'straight' (or at 0 or 90 degree angles). Every wall I draw I have to perfectly place so it is straight or click to 'fix off angle wall'. I updated to X15 but that was a month or so ago and this just started happening.
-
GOT IT THANK YOU!!
-
Thank you! Do you have any advice on how to import the texutres and DAE together? I downloaded the textures folder onto my computer, but still uploads the file white.
-
I use CA X13 and Lumion, usually I export the DAE and import into Lumion no problem. I recently got a new laptop that I downloaded CA on so I could work on the go, but I kept Lumion on my desktop. Now, when I export my DAE from my laptop and open it on my desktop in Lumion EVERYTHING IS WHITE. I’ve tried transferring it through email, Google drive, one drive, USB, and I’ve also tried a DWG file instead. The DWG transferred the color but not textures. PLEASE HELP! Do I have to have Lumion on the same computer for the file to stay ’intact’?
-
-
I ended up doing that and it works just fine! Hard to get it lined up perfect but that's what I needed. Thank you!
-
1 minute ago, rgardner said:
Kind of a hog for time, but I have also used a straight wall and added in a shaped window pass through with all of the settings adjusted. no sill/frame/casing/etc.
That's a good idea, kind of a way to cheat it for a rendering.
-
Here it is.. its a little bizarre because the outsides of the home are going to be shipping containers. Thank you!
-
-
-
43 minutes ago, Chopsaw said:
Have you taken a look at any of these ? https://www.chiefarchitect.com/products/samples.html
No I forgot about those! I will check them out, thank you!
-
Does anyone have a set of elevations completely done that they wouldn't mind sharing with me? I am trying to improve on the construction document side and not just the design aspect. My email is hello@torgyshomedesign.com
Thank you!
-
22 minutes ago, solver said:
THANK YOU so much Eric! I appreciate all this help and advice so much.
-
36 minutes ago, Alaskan_Son said:
As Eric alluded to, uncheck "Flat Ceiling Over This Room". Also, uncheck "Use Room Ceiling Finish" in the Ceiling Plane Structure tab.
I have both options unchecked at the vaulted ceiling still follows the roof pitch instead of the scissor trusses. Any other ideas? I feel like it has to be something with the end truss. I cannot get that truss to take the same shape at the scissor trusses. The interior wall is following the truss line as you can see in the third picture I attached, but the exterior wall is not.
-
6 minutes ago, solver said:
Is there a ceiling surface that follows the bottom cord of the truss?
In the glass house view, it looks like you have Flat Ceiling checked for the attic room on this end.
Attaching the plan file would help.
I have attached it as a reply. I don't know if it notifies you.
-
It is a mess now from me clicking every button trying to figure it out, but hopefully it will help you help me
-
-
I am trying to build a shop that will have scissor truss framing and 12ft walls. I want the downstairs to have 8ft ceilings, and have the 'attic' space have vaulted ceilings with whatever head space is left over. Just enough space for some storage. I have the framing how I want it, but when I go to the rendering of the inside the ceiling will not follow the trusses. Instead the ceiling is following the roof pitch and ignoring the trusses. I have attached two pictures to show the framing, and then how the ceiling is following the pitch instead of the truss. Any help is appreciated!
-
27 minutes ago, robdyck said:
Did you build the terrain on the main floor? That's where it belongs. I bet you built it on floor 0 so you'll need to follow Dermot's advice below.
Yes the terrain is on the main floor, and Dermots advice worked. Thank you!
-
6 minutes ago, Dermot said:
Select the terrain perimeter and use the Make Terrain Hole Around Building tool to convert the automatic hole into a manual one. Then modify the shape of the hole as needed.
THANK YOU! That was it! I knew it had to be something that simple.
-
15 minutes ago, DzinEye said:
Terrain Elevation Region
I used terrain elevation region to create my hillside if that is what you are referring to. I also have the 'hide terrain' box checked for my general terrain. I am not sure which part is unclear, but I am trying to figure out how to hide the terrain in the basement since the hillside is going through the interior as well. Please let me know if another picture would help you help me, It is very much appreciated!
-
I am doing my first walkout basement and I have the terrain exactly how I want it, but I cannot figure out how to keep the terrain out of the house. In the real world the hillside would obviously be dug out where the house is going to go so it has to be an easy fix on Chief Architect that I am missing. Any advice is appreciated!
-
I have been trying for DAYS to figure out how to do a roof like the picture attached and I cannot get it. I don't know how to make the wall heights different on the front and back of the building and get the roof to connect to the walls. I would greatly appreciate any help!
OFF ANGLE WALLS & OBJECTS
in General Q & A
Posted
Figured it out! Edit-Snap Settings-Angle Snaps.