• ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Member Statistics

    29119
    Total Members
    9156
    Most Online
    FritzC
    Newest Member
    FritzC
    Joined
  • Similar Content

    • By JamesKCI
      Hey All,
       
      My company is in the process of making the switch from Autodesk Revit to Chief Arch (Version X12) and I have been spending my time trying to create a lot of commonly used design elements we use on our plans but I have run into a hiccup. I'm trying to create a small, inset-type staircase (attached image is what I've done in Revit in the past) that is typically used on our plans to go from grade-level sidewalk to the main floor elevation. In my attempts, stairs either fail to recognize the elements around them or if I create them like I would in Revit in creates this garbled configuration where the stairs are their own room and the footprint of the stairs themselves cut a hole through the roof.
       
      Checking Forums, YouTube, and the Chief site have all yielded nothing and I in my limited knowledge cannot figure it out. What am I missing?

    • By No1ZZTopfan
      A bit of an issue. I have two staircases. One from the basement to the first floor. Directly above are the other stairs which go from the first to the second floor. When I run "Auto Stairwell" on the basement stairs, the other stairs drop to the basement. I have never had this issue in any other versions. Why? (See attached screen shoot). Running CA12 on Win10Pro.
       
      Thanks in advance.

    • By stevenyhof
      I'm making an electrical plan and trying to figure out how to add my electrical line to my light fixture over the stairs - shown on the main floor. So I have a 2 way switch at the bottom and top of the stairs.
    • By stevenyhof
      I was messing around with my template wanting to get some more things in place for my stairs and defaults. I ran into this before and just moved on, but now I am drawing homes using Chief and need to find a way to angle or follow the stairs with a halfwall. Thank you
      SND_D_Residential Template.plan



    • By Designer100
      1) Finished floor for this existing building is 36". The driveway in back is level with finish floor also. I cannot get the landscape all around to fill in under building and driveway. The drive slopes up to flat across as much as I have flat. The exist. H.C. ramp goes into a concrete porch. This is as-built plan and then I will design a restaurant on the first floor. 
      2) I cannot get u shaped stairs to work and land on the 2nd floor by the entry door.
       
      I would appreciate any help in accomplishing what i need to do.
       
      Thanks,
       
      Newell 
      Moheb Building.plan