barkingeater Posted September 7, 2015 Share Posted September 7, 2015 one gable roof hits low on a wall, that wall has gable roof but its higher. I cannot seem to get lower roof gable end to have zero overhang. any ideas? Link to comment Share on other sites More sharing options...
HumbleChief Posted September 7, 2015 Share Posted September 7, 2015 You must have a room defined incorrectly. Are you using Auto Roofs? Can you post the plan? Link to comment Share on other sites More sharing options...
DavidJPotter Posted September 7, 2015 Share Posted September 7, 2015 You can get close to zero overhang manually by adjusting the eave roof edges but true zero overhand is problematic in terms of 3D modeling (roof planes must cut off wall tops by overhanging them at least a little as 1/16" of an inch really. You are always more likely to get useful answers posting a copy of your plan than otherwise. You also have to describe your problem so that anyone can quickly understand in detail what you are having difficulty with (your post above does not clearly communicate exactly what is going on that needs a solution), DJP Link to comment Share on other sites More sharing options...
Alaskan_Son Posted September 7, 2015 Share Posted September 7, 2015 Posting the plan would definitely help. Link to comment Share on other sites More sharing options...
WendyatArtform Posted September 7, 2015 Share Posted September 7, 2015 In plan view: 1 - Grab the roof edge @ 1 in this picture, drag back and snap to the surface of the adjacent wall. That will cure the problem with that wall not building correctly. 2 - To have zero overhang, grab the roof edge @ 2 in this picture, drag back and snap to the surface of the wall it's above. Then look in 3D. If the wall is shooting up past the roof, go back to plan view and drag it back out by 1/2" or so. Repeat until 3D looks correct. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now