CoolHandLuke Posted March 20, 2014 Share Posted March 20, 2014 I have had this problem forever and I am sure someone out there has a simple fix. I cannot seem to get the top and bottom lines on the layout to print out. Everything else is fine so I have not given it much thought. I have adjusted my plotter to shorten up the top and bottom margins, but same results. I am now using X6 and of course the problem is still there. It is my issue I know but spare me and enlighten me if you will. I have actually gone to the ARCH D layout template but do not want to mess it up. Thanks! Link to comment Share on other sites More sharing options...
Doug_Park Posted March 20, 2014 Share Posted March 20, 2014 If you select the printer you are ultimately going to print to in your sheet setup you should see blue lines indicating the printable area. Some large format printers have margins in excess of 1/2", especially some of the older printers. Set up your margins so that they are inside the blue lines. Link to comment Share on other sites More sharing options...
lbuttery Posted March 20, 2014 Share Posted March 20, 2014 I have a 1/4" layout border placed on page 0 that I turn off before printing this is what Officmax needs for their printers Lew Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now