Walkout Basement Floor Issue


JKEdmo
 Share

Go to solution Solved by JKEdmo,

Recommended Posts

Hello,

 

Week 3 or so of my Chief journey.  Going pretty well.

 

Anyhow, been working on an as-built model with a walk-out basement.  I would like to have the basement floor be concrete slab-on-grade with the wood framed walls sitting on top.  It appears my wood walls are going through the slab. I'm a bit stumped as to the solution.  Any help would be appreciated.

 

I have attached the plan file.

 

Thank you again,

 

Jim

 

image.thumb.png.78d98d85943bc07f66400d8795f3dc0a.png

 

THE MUNSON RESIDENCE - AS-BUILTS.plan

Link to comment
Share on other sites

If I am not mistaken,  you want the Retaining Wall on footing at one side of foundation and a mono slab footing on the opposite side.

 

This is the reason that I believe the floor plan of the walk out basement should be on level 1 (not level 0).  If the walk out basement plan is on level 1,  this allows the mono slab foundation to be on level 0. 

 

Now define all footings at level 0 to be mono slab footings and the retaining wall is defined as a foundation stem wall.  A bit tricky....  probably very difficult to build auto so this is a manual build.

 

 

Link to comment
Share on other sites

If I understand correctly, which is a big if:

 

Referencing the Default Settings>Floors and Rooms>Floor Levels>Floor 0 dialog box, the basic issue is that the Absolute Elevations>Floor value needs to be coordinated with the Relative Heights>Stem Wall value. You can either:

1. Adjust the Stem Wall value:

588541356_ScreenShot10-13-22at08_34AM.thumb.JPG.e1668088987487dd1c271a61763862a5.JPG775775310_ScreenShot10-13-22at08_35AM.thumb.JPG.4341bcd18800c6dee779d1db379b6443.JPG

 

2. Adjust the Floor value:

1307852776_ScreenShot10-13-22at08_36AM.thumb.JPG.e63d35c53e54b1bb73a7a282985a43e6.JPG986737509_ScreenShot10-13-22at08_38AM.thumb.JPG.c70a8be9c0f117c9a190886fa63f60d0.JPG

 

 

 

Link to comment
Share on other sites

  • Solution
On 10/13/2022 at 6:44 AM, rlackore said:

Referencing the Default Settings>Floors and Rooms>Floor Levels>Floor 0 dialog box, the basic issue is that the Absolute Elevations>Floor value needs to be coordinated with the Relative Heights>Stem Wall value. You can either:

1. Adjust the Stem Wall value:

 

Thanks everyone for the help on this.  I adjusted the stem wall height and this works for my purposes.

 

Jim

 

 

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share