GeneDavis Posted January 16, 2020 Share Posted January 16, 2020 I did this house model as an exercise, using a for-sale plan, the web page showing plan views and many inside and outside images. The wall in question is shown in the images attached. Plan is attached also. The psolid out in the air away from the corner is a start at manually patching the whole thing, but why do I have to? NSB_Cottage_1725.plan Link to comment Share on other sites More sharing options...
glennw Posted January 17, 2020 Share Posted January 17, 2020 Gene, That's a bit of a funny one that I can't fully figure out. Open the 2 windows that run up and down the page, go to the Casing panel and uncheck Use Interior Casing. You also have an invisible wall running into the external corner. Pull that back or delete it. That seems to get things looking OK on the outside. There are definitely some weird things happening though. Link to comment Share on other sites More sharing options...
Renerabbitt Posted January 17, 2020 Share Posted January 17, 2020 10 hours ago, GeneDavis said: but why do I have to? Change that exterior room to something other than "deck" Link to comment Share on other sites More sharing options...
GeneDavis Posted January 17, 2020 Author Share Posted January 17, 2020 Away from PC right now, but tried doing a simple 20' square box house with same window corner and got same problem. Casements, 30" w x 48" h, force into corner and edit offsets to 3.75" both ways, between-pair separation 3.5". I built two houses with this config, 3.5" corner post in 2x6 wall framing. EDIT: Incorrecto! The config works in a plain box house situation. See pic. It is the wall intersect that must be doing it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now