I'm using home designed pro 2021.
 
Circled in the picture below is the area unfilled between the lower and upper roof where there is no wall.  I can extend the wall inward toward the peak to close the gap, but then area below the gap is closed off.  I've experimented, googled, and watched a bunch of video tutorials on roofs.  Actually seemed like one of the tutorial videos had a similar issue, but the instructor kinda glossed over it and changed to pitch on one roof to make it look a little better before moving on.
 

 
After banging my head for a few days, hoping someone has the answer.
(plan is also attached for the image)
MissingGableWall.plan

I am drawing a cross section using 2D CAD lines (to get more detail than the automatic cross section Chief creates).
I am having issues finding a Batt Insulation Pattern to use.
 
I am using Chief X9
 
- Chief Architect has a Block under "CAD Blocks / Detail Components / Insulation / Batt / 5.5" R-21", but unfortunately it is only 12" x 5 1/2" of size, so if I want a smaller or bigger section, it stretches the block and the proportions change. 
- I found a free .PAT file online (attached), but It needs to be in a specific location to work, the minute I move the polyline with that pattern in it, the pattern moves with it.
 
I have tried to illustrate this in the attached screen shot. 
Please let me now if anyone has any recommendations / solutions to this issue.
 
thanks,
Angela 

H1INSUN1.pat

Hi, attached is an stair section, How can i turn off the grey fill color for stair?

 

Issue in X12 when using break tool to adjust wall for an extension over a column.
Bare wall end fir stud and overhead framing stud can be seen in wall section instead of drywall.
 
See attached file/pic.
 
I do not believe soffit is viable solution as I am seeing that soffits will not frame.
So framing is important.
 
***************************
Many thanks to Solver as he addressed this issue and resolved it for my needs by applying different wall types to the wall area drawing. I posted my original files as reference and Solver's solution file (1868954996_MHD_sampletemplateplanSolutionWallEnds).
And the solution frames out too as can be seen in file with camera Perspective Floor & Perspective Framing views.

Wall End Issues.plan
1868954996_MHD_sampletemplateplanSolutionWallEnds.plan

please tell me how to calculate the length of all the walls