brushpark Posted June 21, 2018 Share Posted June 21, 2018 I have a door that is approx. 1 1/2" recessed into a wall with a tudor arch surround. The door itself has a straight top. I tried adding a niche with an arch first then the door but its not working. Any thoughts? I have attached a picture of the actual door. Thanks! Link to comment Share on other sites More sharing options...
scout1 Posted June 21, 2018 Share Posted June 21, 2018 try using the wall niche. you can find in the pull down in windows you can put above door then select it and change to an arch. 1 Link to comment Share on other sites More sharing options...
glennw Posted June 21, 2018 Share Posted June 21, 2018 You can use a Wall Material Region to cut layers from the wall and insert a wall finish for the recess. Then use the door's Jamb depth and Inset to locate the door the desired depth in the wall. This is a quick one I just did. You may have to edit your wall layers as the Wall Material Region will only cut surfaces back to the main layer. ie, it will only cut finish wall layers. Link to comment Share on other sites More sharing options...
scout1 Posted June 21, 2018 Share Posted June 21, 2018 sorry for last reply try to draw a wider wall say 6" then trim each side of door select small wall section make a 4 1/2 wall insert door use poly line draw arch over door (see drawing poly line arch convert to solid and enter depth) 1 Link to comment Share on other sites More sharing options...
scout1 Posted June 21, 2018 Share Posted June 21, 2018 more pics of door 1 Link to comment Share on other sites More sharing options...
brushpark Posted June 22, 2018 Author Share Posted June 22, 2018 Thanks all! Working on it now. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now