• ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Member Statistics

    28148
    Total Members
    6254
    Most Online
    Yusefun
    Newest Member
    Yusefun
    Joined
  • Similar Content

    • By Designer100
      can anyone explain how and help me enclose between this new gable roof and ceiling. Also looking toward house thru gable closing in with Hardi-siding. The old roof is showing thru and something else when I do a rendering (see attached). Need to look good for a client in 3 D. They are adding a roof over existing 10' x 20' patio. 
       
      thank you if you can help.
       
      Newell Cheatheam
      CA 12
      newell@newellcheatheam.com 

      Patio Remodeling.plan
    • By stevenyhof
      Hello,
      I have been learning a lot about building porches, both manually and using Railings.
      I used a Room Divider to make the concrete pad. Then a molding profile to add 4" around it. 
      I made a 1x1 sq profile and made my beam, and added in my columns.
      I built several porches trying different roofs, but end up with no gable end wall. 
      I tried added an exterior wall and making it an attic wall, which added some frieze boards, but the wall just covered my porch from concrete up.
      Not finding much on videos for porches.
      Thank you
       

    • By 1090291004350551
      Hello everyone,
      In my current project, a client asks for a groin vault, something like that. 
      I've looked through the forum but I can't find anything about this.
       
      How is it possible to do with Chief? 
       I would be very grateful for a video.

      Thanks in advance 

    • By StaceyRamsey1
      Hi.
      I have a problem that I am hoping to get some feedback on Re: soffits. I believe to be a X11 issue.  In my plan, i created open rafters first on attic level with no finished ceiling, the soffits would "glow" with emission. I am a part of Chief Tutor.com so I sent .plan to him to get feedback.  He took the file, put the soffit rafters on the first level and it fixed the problem on his computer.  However, when i did what he instructed on my own software, the soffits would still glow in physically based render with "improve lighting quality" checked, and they are downright black when the improve lighting is not checked.  He informed me it was  likely an X11 issue because he was able to resolve in the newest version.  Is there a work around I can do for this?   I am contracted out through a small construction company and they may not be upgrading to new version; So a work around would be ideal.  Thank you.  See attached files for images of problem.



    • By ChristinoDesign
      We're trying to figure out how to change the angle of pendent lights on vaulted ceilings. When we create the ceiling angle, the lights follow and aren't angled properly. How do we change the lights so they go vertical rather than at a tilt?