Arkad7 Posted October 14, 2017 Share Posted October 14, 2017 I have fought with this program for week, trying to make the roof do what I want it to do. I finally did enough roof pane stretching to get the roof I want, but it has left holes on gable ends. One hole goes through to the rooms below, and the other just seems to be an area without siding. Any ideas? Link to comment Share on other sites More sharing options...
chief58 Posted October 14, 2017 Share Posted October 14, 2017 Sometimes you have to take your attic wall and drag it to move it over Link to comment Share on other sites More sharing options...
DMDesigns Posted October 14, 2017 Share Posted October 14, 2017 This may help - or feel free to send it into ChiefTutor.com 3 Link to comment Share on other sites More sharing options...
DRAWZILLA Posted October 14, 2017 Share Posted October 14, 2017 Dave, nice job buddy 1 Link to comment Share on other sites More sharing options...
CJSpud Posted October 14, 2017 Share Posted October 14, 2017 Ditto to Perry's comment on David's tutorial ... EXCELLENT! Without seeing your plan, one can only guess as to what you have. Lots of things can go wrong if you haven't done things Chiefly. Attached is a simple plan which shows the attic gable filling in correctly where the wall jog is located. I just designated the three exterior walls as gables and let Chief auto build the roof. Check it out and have a play with it. Per Erik's comment, I too have had to draw in an attic gable wall occasionally ... just go to the attic level and draw in your attic wall as needed. GableRoof.plan 1 Link to comment Share on other sites More sharing options...
javatom Posted October 14, 2017 Share Posted October 14, 2017 Nice job Dave. Teaching takes patience and abilities. You have both. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now