separate roof height in same building


SMC2992
 Share

Recommended Posts

I don't know how to handle the portion i circled, when i remove the straight wall this is what i get, I need that the roof of the portion over the doors should be at 10' however an open window has been created above that location. see the pic

 

-Salah

left view.jpg

MI room 2.plan

  • Downvote 1
Link to comment
Share on other sites

I probably don't understand your intent, but there's nothing preventing you from drawing a flat roof around the perimeter of the building. Just draw a roof plane, set the pitch to 0, and shape it as necessary. Then draw a rectangle around the middle portion and convert it to a roof hole:

flatroof.thumb.PNG.da39661db26efdcb8ff4c9a6cbf3c3c9.PNG

 

As far as the disappearing wall, you need a roof plane over that bay. Any roof, really:

flatroof2.thumb.PNG.32a447fff7ae7c1a9c237497daaa385a.PNG

Link to comment
Share on other sites

On 16/06/2017 at 7:32 PM, DavidJPotter said:

It required two try's to get a video made but this shows you a way to arrive at what I think you need and want:

DJP

DJP thank you for the detailed explanation, it has solved the problem.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share