Porch Gable issue


Designer100
 Share

Recommended Posts

Randy, this is not a difficult task.

 

Open your plan

1) Turn the "Roof, Planes " layer on. 

2) Connect roof planes

3) Select each plane of this porch gable and set same height as a fascia height of your main roof. In this case it is 110 7/16"

fasciaconnected.thumb.jpg.1c091ac34ba9efe3902a75df8a65e44d.jpg

4) Select planes at the ridge and use "2" to connect them.

 

I am not 100% sure what ceiling you intend to put.

 

If you check with the room porch DBX.

You ceiling height is set at 169". That will create a nice exposed vault.

If you want a flat ceiling you need to set it to something like 96"

 

BT
 

Link to comment
Share on other sites

8 hours ago, Designer100 said:

it will not let me change to 110 7/16" and 4:12 pitch. I change one and it changes the other if I lock one?

 

First lock the pitch and set you fascia height to 110 7/16".

Now lock the fascia height and set your pitch to 4:12.

 

Practice, practice, practice.

Link to comment
Share on other sites

  • 1 month later...

This forum is the best source for quick HELP with Chief Architect and always has been. Scott we all owe you a "thank you" too, you have helped many. I must add this bit of humor, Scott you have also "ticked off" many, lol.

  • Upvote 3
Link to comment
Share on other sites

ShaneK
I am with you. There is nothing that makes great than being thankful.
I gave point to Erric.

+1 for your self.
Thanks to Scott. Scott is the best, his tutorials are very nice to follow.

Appreciate the time taken to help others.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share