JennyB

Members
  • Posts

    22
  • Joined

  • Last visited

Posts posted by JennyB

  1. Hi,

    If you are in need of residential CAD drawings, please contact me!

    My name is Jenny Burger, and I am the owner of CADesigns, LLC.  I have over 28 years of experience in the design industry with ten years of experience in kitchen and bath design. I specialize in producing 2D and 3D residential architectural drawings. I have extensive experience as it relates to residential new construction, additions, and renovations.

    I bill by the hour for the initial meeting, CAD time, site measuring, project time, phone meetings, and all subsequent meetings. I charge $.60 cents/mile from my location (Norcross, GA) to and from job sites and meetings.
    After reviewing your plans, project requirements, meeting and/or site measuring and learning more about your project, I can give you an estimated number of hours. The exact number of revisions and exact drawings required for permitting will affect the price. For the sake of clarity, all plans from preliminary plans up through construction plans must be communicated between and confirmed by both parties. 

    Initially, I will create schematic space planning floor plans. Once the floor plans are finalized, I will create the 3-D perspective color drawings, if necessary. Finally, I will draw the technical permit drawings. Please provide me with a list of drawings required by you and for permitting. The required drawings for permitting typically can be found on the county's website. During the design phase, I will email you the PDF drawings to review, approve, and print to scale. Please make sure "Actual Size" is checked when printing the PDF drawings. During the design phase, I will invoice periodically throughout the project. I will invoice as I email PDF drawing sets to approve. For instance, once I email the initial conceptual floor plans to you to review and approve, at this time, I will, also, email an invoice for the work completed thus far. Once a payment has been made, I will email the updated plans to include dimensions and to print to scale, and then begin the next set of revisions and/or drawings.

     

    It is important to note that I am not an architect. I am a CAD technician with a B.S. in Interior Design. Therefore, my drawings may need to be stamped/sealed by a registered/certified architect or engineer as required by local law, ordinance, and code. Any structural drawings pertaining to weights/loads such as footing details, floor framing plans/roof framing plans, retaining walls, foundation plans, LVL/headers, etc. must be drawn and approved by an engineer. However, if the contractor knows and provides me with the required materials/sizes/spacing/headers/footings/foundation/specifications for the structural drawings, I can draw them. 

    Below is a link showing examples of my work:

    http://issuu.com/burgerja

    I look forward to working with you!

    Thanks!
    Jenny Burger

    jennyaburger@gmail.com
    http://issuu.com/burgerja
    RESUME' - www.linkedin.com/in/jennyburger/
    www.
    facebook.com/profile.php?id=100079704292361

    RENDERINGS
    https://www.dropbox.com/sh/jpc1escvoicrxaz/AABNnj58SkejnLw_59DxuDXma?dl=0

     

  2. Hi,

    If you are in need of residential CAD drawings, please contact me!

    My name is Jenny Burger, and I am the owner of CADesigns, LLC.  I have over 28 years of experience in the design industry with ten years of experience in kitchen and bath design. I specialize in producing 2D and 3D residential architectural drawings. I have extensive experience as it relates to residential new construction, additions, and renovations.

    I bill by the hour for the initial meeting, CAD time, site measuring, project time, phone meetings, and all subsequent meetings. I charge $.60 cents/mile from my location (Norcross, GA) to and from job sites and meetings.
    After reviewing your plans, project requirements, meeting and/or site measuring and learning more about your project, I can give you an estimated number of hours. The exact number of revisions and exact drawings required for permitting will affect the price. For the sake of clarity, all plans from preliminary plans up through construction plans must be communicated between and confirmed by both parties. 

    Initially, I will create schematic space planning floor plans. Once the floor plans are finalized, I will create the 3-D perspective color drawings, if necessary. Finally, I will draw the technical permit drawings. Please provide me with a list of drawings required by you and for permitting. The required drawings for permitting typically can be found on the county's website. During the design phase, I will email you the PDF drawings to review, approve, and print to scale. Please make sure "Actual Size" is checked when printing the PDF drawings. During the design phase, I will invoice periodically throughout the project. I will invoice as I email PDF drawing sets to approve. For instance, once I email the initial conceptual floor plans to you to review and approve, at this time, I will, also, email an invoice for the work completed thus far. Once a payment has been made, I will email the updated plans to include dimensions and to print to scale, and then begin the next set of revisions and/or drawings.

     

    It is important to note that I am not an architect. I am a CAD technician with a B.S. in Interior Design. Therefore, my drawings may need to be stamped/sealed by a registered/certified architect or engineer as required by local law, ordinance, and code. Any structural drawings pertaining to weights/loads such as footing details, floor framing plans/roof framing plans, retaining walls, foundation plans, LVL/headers, etc. must be drawn and approved by an engineer. However, if the contractor knows and provides me with the required materials/sizes/spacing/headers/footings/foundation/specifications for the structural drawings, I can draw them. 

    Below is a link showing examples of my work:

    http://issuu.com/burgerja

    I look forward to working with you!

    Thanks!
    Jenny Burger

    jennyaburger@gmail.com
    http://issuu.com/burgerja
    RESUME' - www.linkedin.com/in/jennyburger/
    www.
    facebook.com/profile.php?id=100079704292361

    RENDERINGS
    https://www.dropbox.com/sh/jpc1escvoicrxaz/AABNnj58SkejnLw_59DxuDXma?dl=0

     

  3. Hi,

    If you are in need of residential CAD drawings, please contact me!

    My name is Jenny Burger, and I am the owner of CADesigns, LLC.  I have over 28 years of experience in the design industry with ten years of experience in kitchen and bath design. I specialize in producing 2D and 3D residential architectural drawings. I have extensive experience as it relates to residential new construction, additions, and renovations.

    I bill by the hour for the initial meeting, CAD time, site measuring, project time, phone meetings, and all subsequent meetings. I charge $.60 cents/mile from my location (Norcross, GA) to and from job sites and meetings.
    After reviewing your plans, project requirements, meeting and/or site measuring and learning more about your project, I can give you an estimated number of hours. The exact number of revisions and exact drawings required for permitting will affect the price. For the sake of clarity, all plans from preliminary plans up through construction plans must be communicated between and confirmed by both parties. 

    Initially, I will create schematic space planning floor plans. Once the floor plans are finalized, I will create the 3-D perspective color drawings, if necessary. Finally, I will draw the technical permit drawings. Please provide me with a list of drawings required by you and for permitting. The required drawings for permitting typically can be found on the county's website. During the design phase, I will email you the PDF drawings to review, approve, and print to scale. Please make sure "Actual Size" is checked when printing the PDF drawings. During the design phase, I will invoice periodically throughout the project. I will invoice as I email PDF drawing sets to approve. For instance, once I email the initial conceptual floor plans to you to review and approve, at this time, I will, also, email an invoice for the work completed thus far. Once a payment has been made, I will email the updated plans to include dimensions and to print to scale, and then begin the next set of revisions and/or drawings.

     

    It is important to note that I am not an architect. I am a CAD technician with a B.S. in Interior Design. Therefore, my drawings may need to be stamped/sealed by a registered/certified architect or engineer as required by local law, ordinance, and code. Any structural drawings pertaining to weights/loads such as footing details, floor framing plans/roof framing plans, retaining walls, foundation plans, LVL/headers, etc. must be drawn and approved by an engineer. However, if the contractor knows and provides me with the required materials/sizes/spacing/headers/footings/foundation/specifications for the structural drawings, I can draw them. 

    Below is a link showing examples of my work:

    http://issuu.com/burgerja

    I look forward to working with you!

    Thanks!
    Jenny Burger

    jennyaburger@gmail.com
    http://issuu.com/burgerja
    RESUME' - www.linkedin.com/in/jennyburger/
    www.
    facebook.com/profile.php?id=100079704292361

    RENDERINGS
    https://www.dropbox.com/sh/jpc1escvoicrxaz/AABNnj58SkejnLw_59DxuDXma?dl=0

     

  4. Hi,

    If you are in need of residential CAD drawings, please contact me!

    My name is Jenny Burger, and I am the owner of CADesigns, LLC.  I have over 28 years of experience in the design industry with ten years of experience in kitchen and bath design. I specialize in producing 2D and 3D residential architectural drawings. I have extensive experience as it relates to residential new construction, additions, and renovations.

    I bill by the hour for the initial meeting, CAD time, site measuring, project time, phone meetings, and all subsequent meetings. I charge $.60 cents/mile from my location (Norcross, GA) to and from job sites and meetings.
    After reviewing your plans, project requirements, meeting and/or site measuring and learning more about your project, I can give you an estimated number of hours. The exact number of revisions and exact drawings required for permitting will affect the price. For the sake of clarity, all plans from preliminary plans up through construction plans must be communicated between and confirmed by both parties. 

    Initially, I will create schematic space planning floor plans. Once the floor plans are finalized, I will create the 3-D perspective color drawings, if necessary. Finally, I will draw the technical permit drawings. Please provide me with a list of drawings required by you and for permitting. The required drawings for permitting typically can be found on the county's website. During the design phase, I will email you the PDF drawings to review, approve, and print to scale. Please make sure "Actual Size" is checked when printing the PDF drawings. During the design phase, I will invoice periodically throughout the project. I will invoice as I email PDF drawing sets to approve. For instance, once I email the initial conceptual floor plans to you to review and approve, at this time, I will, also, email an invoice for the work completed thus far. Once a payment has been made, I will email the updated plans to include dimensions and to print to scale, and then begin the next set of revisions and/or drawings.

     

    It is important to note that I am not an architect. I am a CAD technician with a B.S. in Interior Design. Therefore, my drawings may need to be stamped/sealed by a registered/certified architect or engineer as required by local law, ordinance, and code. Any structural drawings pertaining to weights/loads such as footing details, floor framing plans/roof framing plans, retaining walls, foundation plans, LVL/headers, etc. must be drawn and approved by an engineer. However, if the contractor knows and provides me with the required materials/sizes/spacing/headers/footings/foundation/specifications for the structural drawings, I can draw them. 

    Below is a link showing examples of my work:

    http://issuu.com/burgerja

    I look forward to working with you!

    Thanks!
    Jenny Burger

    jennyaburger@gmail.com
    http://issuu.com/burgerja
    RESUME' - www.linkedin.com/in/jennyburger/
    www.
    facebook.com/profile.php?id=100079704292361

    RENDERINGS
    https://www.dropbox.com/sh/jpc1escvoicrxaz/AABNnj58SkejnLw_59DxuDXma?dl=0

     

  5. Hi,

    If you are in need of residential CAD drawings, please contact me!

    My name is Jenny Burger, and I am the owner of CADesigns, LLC.  I have over 28 years of experience in the design industry with ten years of experience in kitchen and bath design. I specialize in producing 2D and 3D residential architectural drawings. I have extensive experience as it relates to residential new construction, additions, and renovations.

    I bill by the hour for the initial meeting, CAD time, site measuring, project time, phone meetings, and all subsequent meetings. I charge $.60 cents/mile from my location (Norcross, GA) to and from job sites and meetings.
    After reviewing your plans, project requirements, meeting and/or site measuring and learning more about your project, I can give you an estimated number of hours. The exact number of revisions and exact drawings required for permitting will affect the price. For the sake of clarity, all plans from preliminary plans up through construction plans must be communicated between and confirmed by both parties. 

    Initially, I will create schematic space planning floor plans. Once the floor plans are finalized, I will create the 3-D perspective color drawings, if necessary. Finally, I will draw the technical permit drawings. Please provide me with a list of drawings required by you and for permitting. The required drawings for permitting typically can be found on the county's website. During the design phase, I will email you the PDF drawings to review, approve, and print to scale. Please make sure "Actual Size" is checked when printing the PDF drawings. During the design phase, I will invoice periodically throughout the project. I will invoice as I email PDF drawing sets to approve. For instance, once I email the initial conceptual floor plans to you to review and approve, at this time, I will, also, email an invoice for the work completed thus far. Once a payment has been made, I will email the updated plans to include dimensions and to print to scale, and then begin the next set of revisions and/or drawings.

     

    It is important to note that I am not an architect. I am a CAD technician with a B.S. in Interior Design. Therefore, my drawings may need to be stamped/sealed by a registered/certified architect or engineer as required by local law, ordinance, and code. Any structural drawings pertaining to weights/loads such as footing details, floor framing plans/roof framing plans, retaining walls, foundation plans, LVL/headers, etc. must be drawn and approved by an engineer. However, if the contractor knows and provides me with the required materials/sizes/spacing/headers/footings/foundation/specifications for the structural drawings, I can draw them. 

    Below is a link showing examples of my work:

    http://issuu.com/burgerja

    I look forward to working with you!

    Thanks!
    Jenny Burger

    jennyaburger@gmail.com
    http://issuu.com/burgerja
    RESUME' - www.linkedin.com/in/jennyburger/
    www.
    facebook.com/profile.php?id=100079704292361

    RENDERINGS
    https://www.dropbox.com/sh/jpc1escvoicrxaz/AABNnj58SkejnLw_59DxuDXma?dl=0

     

  6. Hi,

    If you are in need of residential CAD drawings, please contact me!

    My name is Jenny Burger, and I am the owner of CADesigns, LLC.  I have over 28 years of experience in the design industry with ten years of experience in kitchen and bath design. I specialize in producing 2D and 3D residential architectural drawings. I have extensive experience as it relates to residential new construction, additions, and renovations.

    I bill by the hour for the initial meeting, CAD time, site measuring, project time, phone meetings, and all subsequent meetings. I charge $.60 cents/mile from my location (Norcross, GA) to and from job sites and meetings.
    After reviewing your plans, project requirements, meeting and/or site measuring and learning more about your project, I can give you an estimated number of hours. The exact number of revisions and exact drawings required for permitting will affect the price. For the sake of clarity, all plans from preliminary plans up through construction plans must be communicated between and confirmed by both parties. 

    Initially, I will create schematic space planning floor plans. Once the floor plans are finalized, I will create the 3-D perspective color drawings, if necessary. Finally, I will draw the technical permit drawings. Please provide me with a list of drawings required by you and for permitting. The required drawings for permitting typically can be found on the county's website. During the design phase, I will email you the PDF drawings to review, approve, and print to scale. Please make sure "Actual Size" is checked when printing the PDF drawings. During the design phase, I will invoice periodically throughout the project. I will invoice as I email PDF drawing sets to approve. For instance, once I email the initial conceptual floor plans to you to review and approve, at this time, I will, also, email an invoice for the work completed thus far. Once a payment has been made, I will email the updated plans to include dimensions and to print to scale, and then begin the next set of revisions and/or drawings.

     

    It is important to note that I am not an architect. I am a CAD technician with a B.S. in Interior Design. Therefore, my drawings may need to be stamped/sealed by a registered/certified architect or engineer as required by local law, ordinance, and code. Any structural drawings pertaining to weights/loads such as footing details, floor framing plans/roof framing plans, retaining walls, foundation plans, LVL/headers, etc. must be drawn and approved by an engineer. However, if the contractor knows and provides me with the required materials/sizes/spacing/headers/footings/foundation/specifications for the structural drawings, I can draw them. 

    Below is a link showing examples of my work:

    http://issuu.com/burgerja

    I look forward to working with you!

    Thanks!
    Jenny Burger

    jennyaburger@gmail.com
    http://issuu.com/burgerja
    RESUME' - www.linkedin.com/in/jennyburger/
    www.
    facebook.com/profile.php?id=100079704292361

    RENDERINGS
    https://www.dropbox.com/sh/jpc1escvoicrxaz/AABNnj58SkejnLw_59DxuDXma?dl=0

     

  7. Hi,

    If you are in need of residential CAD drawings, please contact me!

    My name is Jenny Burger, and I am the owner of CADesigns, LLC.  I have over 28 years of experience in the design industry with ten years of experience in kitchen and bath design. I specialize in producing 2D and 3D residential architectural drawings. I have extensive experience as it relates to residential new construction, additions, and renovations.

    I bill by the hour for the initial meeting, CAD time, site measuring, project time, phone meetings, and all subsequent meetings. I charge $.60 cents/mile from my location (Norcross, GA) to and from job sites and meetings.
    After reviewing your plans, project requirements, meeting and/or site measuring and learning more about your project, I can give you an estimated number of hours. The exact number of revisions and exact drawings required for permitting will affect the price. For the sake of clarity, all plans from preliminary plans up through construction plans must be communicated between and confirmed by both parties. 

    Initially, I will create schematic space planning floor plans. Once the floor plans are finalized, I will create the 3-D perspective color drawings, if necessary. Finally, I will draw the technical permit drawings. Please provide me with a list of drawings required by you and for permitting. The required drawings for permitting typically can be found on the county's website. During the design phase, I will email you the PDF drawings to review, approve, and print to scale. Please make sure "Actual Size" is checked when printing the PDF drawings. During the design phase, I will invoice periodically throughout the project. I will invoice as I email PDF drawing sets to approve. For instance, once I email the initial conceptual floor plans to you to review and approve, at this time, I will, also, email an invoice for the work completed thus far. Once a payment has been made, I will email the updated plans to include dimensions and to print to scale, and then begin the next set of revisions and/or drawings.

     

    It is important to note that I am not an architect. I am a CAD technician with a B.S. in Interior Design. Therefore, my drawings may need to be stamped/sealed by a registered/certified architect or engineer as required by local law, ordinance, and code. Any structural drawings pertaining to weights/loads such as footing details, floor framing plans/roof framing plans, retaining walls, foundation plans, LVL/headers, etc. must be drawn and approved by an engineer. However, if the contractor knows and provides me with the required materials/sizes/spacing/headers/footings/foundation/specifications for the structural drawings, I can draw them. 

    Below is a link showing examples of my work:

    http://issuu.com/burgerja

    I look forward to working with you!

    Thanks!
    Jenny Burger

    jennyaburger@gmail.com
    http://issuu.com/burgerja
    RESUME' - www.linkedin.com/in/jennyburger/
    www.
    facebook.com/profile.php?id=100079704292361

    RENDERINGS
    https://www.dropbox.com/sh/jpc1escvoicrxaz/AABNnj58SkejnLw_59DxuDXma?dl=0

     

  8. Hi,

    If you are in need of residential CAD drawings, please contact me!

    My name is Jenny Burger, and I am the owner of CADesigns, LLC.  I have over 28 years of experience in the design industry with ten years of experience in kitchen and bath design. I specialize in producing 2D and 3D residential architectural drawings. I have extensive experience as it relates to residential new construction, additions, and renovations.

    I bill by the hour for the initial meeting, CAD time, site measuring, project time, phone meetings, and all subsequent meetings. I charge $.60 cents/mile from my location (Norcross, GA) to and from job sites and meetings.
    After reviewing your plans, project requirements, meeting and/or site measuring and learning more about your project, I can give you an estimated number of hours. The exact number of revisions and exact drawings required for permitting will affect the price. For the sake of clarity, all plans from preliminary plans up through construction plans must be communicated between and confirmed by both parties. 

    Initially, I will create schematic space planning floor plans. Once the floor plans are finalized, I will create the 3-D perspective color drawings, if necessary. Finally, I will draw the technical permit drawings. Please provide me with a list of drawings required by you and for permitting. The required drawings for permitting typically can be found on the county's website. During the design phase, I will email you the PDF drawings to review, approve, and print to scale. Please make sure "Actual Size" is checked when printing the PDF drawings. During the design phase, I will invoice periodically throughout the project. I will invoice as I email PDF drawing sets to approve. For instance, once I email the initial conceptual floor plans to you to review and approve, at this time, I will, also, email an invoice for the work completed thus far. Once a payment has been made, I will email the updated plans to include dimensions and to print to scale, and then begin the next set of revisions and/or drawings.

     

    It is important to note that I am not an architect. I am a CAD technician with a B.S. in Interior Design. Therefore, my drawings may need to be stamped/sealed by a registered/certified architect or engineer as required by local law, ordinance, and code. Any structural drawings pertaining to weights/loads such as footing details, floor framing plans/roof framing plans, retaining walls, foundation plans, LVL/headers, etc. must be drawn and approved by an engineer. However, if the contractor knows and provides me with the required materials/sizes/spacing/headers/footings/foundation/specifications for the structural drawings, I can draw them. 

    Below is a link showing examples of my work:

    http://issuu.com/burgerja

    I look forward to working with you!

    Thanks!
    Jenny Burger

    jennyaburger@gmail.com
    http://issuu.com/burgerja
    RESUME' - www.linkedin.com/in/jennyburger/
    www.
    facebook.com/profile.php?id=100079704292361

    RENDERINGS
    https://www.dropbox.com/sh/jpc1escvoicrxaz/AABNnj58SkejnLw_59DxuDXma?dl=0

     

  9. Hi,

    If you are in need of residential CAD drawings, please contact me!

    My name is Jenny Burger, and I am the owner of CADesigns, LLC.  I have over 28 years of experience in the design industry with ten years of experience in kitchen and bath design. I specialize in producing 2D and 3D residential architectural drawings. I have extensive experience as it relates to residential new construction, additions, and renovations.

    I bill by the hour for the initial meeting, CAD time, site measuring, project time, phone meetings, and all subsequent meetings. I charge $.60 cents/mile from my location (Norcross, GA) to and from job sites and meetings.
    After reviewing your plans, project requirements, meeting and/or site measuring and learning more about your project, I can give you an estimated number of hours. The exact number of revisions and exact drawings required for permitting will affect the price. For the sake of clarity, all plans from preliminary plans up through construction plans must be communicated between and confirmed by both parties. 

    Initially, I will create schematic space planning floor plans. Once the floor plans are finalized, I will create the 3-D perspective color drawings, if necessary. Finally, I will draw the technical permit drawings. Please provide me with a list of drawings required by you and for permitting. The required drawings for permitting typically can be found on the county's website. During the design phase, I will email you the PDF drawings to review, approve, and print to scale. Please make sure "Actual Size" is checked when printing the PDF drawings. During the design phase, I will invoice periodically throughout the project. I will invoice as I email PDF drawing sets to approve. For instance, once I email the initial conceptual floor plans to you to review and approve, at this time, I will, also, email an invoice for the work completed thus far. Once a payment has been made, I will email the updated plans to include dimensions and to print to scale, and then begin the next set of revisions and/or drawings.

     

    It is important to note that I am not an architect. I am a CAD technician with a B.S. in Interior Design. Therefore, my drawings may need to be stamped/sealed by a registered/certified architect or engineer as required by local law, ordinance, and code. Any structural drawings pertaining to weights/loads such as footing details, floor framing plans/roof framing plans, retaining walls, foundation plans, LVL/headers, etc. must be drawn and approved by an engineer. However, if the contractor knows and provides me with the required materials/sizes/spacing/headers/footings/foundation/specifications for the structural drawings, I can draw them. 

    Below is a link showing examples of my work:

    http://issuu.com/burgerja

    I look forward to working with you!

    Thanks!
    Jenny Burger

    jennyaburger@gmail.com
    http://issuu.com/burgerja
    RESUME' - www.linkedin.com/in/jennyburger/
    www.
    facebook.com/profile.php?id=100079704292361

    RENDERINGS
    https://www.dropbox.com/sh/jpc1escvoicrxaz/AABNnj58SkejnLw_59DxuDXma?dl=0

     

  10. Hi,

    If you are in need of residential CAD drawings, please contact me!

    My name is Jenny Burger, and I am the owner of CADesigns, LLC in Atlanta, GA.  I have over 28 years of experience in the design industry with ten years of experience in kitchen and bath design. I specialize in producing 2D and 3D residential architectural drawings. I have extensive experience as it relates to residential new construction, additions, and renovations.

    I bill by the hour for the initial meeting, CAD time, site measuring, project time, phone meetings, and all subsequent meetings. I charge $.60 cents/mile from my location (30093) to and from job sites and meetings.
    After reviewing your plans, project requirements, meeting and/or site measuring and learning more about your project, I can give you an estimated number of hours. The exact number of revisions and exact drawings required for permitting will affect the price. For the sake of clarity, all plans from preliminary plans up through construction plans must be communicated between and confirmed by both parties. 

    Initially, I will create schematic space planning floor plans. Once the floor plans are finalized, I will create the 3-D perspective color drawings, if necessary. Finally, I will draw the technical permit drawings. Please provide me with a list of drawings required by you and for permitting. The required drawings for permitting typically can be found on the county's website. During the design phase, I will email you the PDF drawings to review, approve, and print to scale. Please make sure "Actual Size" is checked when printing the PDF drawings. During the design phase, I will invoice periodically throughout the project. I will invoice as I email PDF drawing sets to approve. For instance, once I email the initial conceptual floor plans to you to review and approve, at this time, I will, also, email an invoice for the work completed thus far. Once a payment has been made, I will email the updated plans to include dimensions and to print to scale, and then begin the next set of revisions and/or drawings.

     

    It is important to note that I am not an architect. I am a CAD technician with a B.S. in Interior Design. Therefore, my drawings may need to be stamped/sealed by a registered/certified architect or engineer as required by local law, ordinance, and code. Any structural drawings pertaining to weights/loads such as footing details, floor framing plans/roof framing plans, retaining walls, foundation plans, LVL/headers, etc. must be drawn and approved by an engineer. However, if the contractor knows and provides me with the required materials/sizes/spacing/headers/footings/foundation/specifications for the structural drawings, I can draw them. 

    Below is a link showing examples of my work:

    http://issuu.com/burgerja

    I look forward to working with you!

    Thanks!
    Jenny Burger

    jennyaburger@gmail.com
    http://issuu.com/burgerja
    RESUME' - www.linkedin.com/in/jennyburger/
    www.
    facebook.com/profile.php?id=100079704292361

    RENDERINGS
    https://www.dropbox.com/sh/jpc1escvoicrxaz/AABNnj58SkejnLw_59DxuDXma?dl=0

  11. I ended up purchasing this custom Sager computer laptop and am extremeley pleased! It's fast and Sager has great customer service. Well worth my money!

    SPECIAL 9772-S SPECIAL PACKAGE
    NP9772U-0 17.3" FHD/MATT NOTEBOOK 8F01SC033444 $2,819.00
    WIN7-S3 WINDOWS 7 PROFESSIONAL 64 BIT  
    CG-ICD IC Diamond on CPU + GPU 
    D-I74790K Core i7 4790K(4.0 GHz) 8M
    V-9772-980M nV GeForce GTX 980M w/8GB 
    R3-32G-4H18 32GB 1866 HYPERX (4 DIMMS) 
    M2P-941-512 SAMSUNG XP941 512G M.2 PCIe SSD   
    H13-1TB-S7 2.5" SATA 1TB(7200rpm) HDD  
    W2-N1525 KILLER WLAN N1525 AC+BT M.2  

    Complete Sager Branding   $0.00 $0.00 1 1 NDP-SCREEN 30 DAYS NO DEAD PIXEL GUARANTEE  
    S-FREE FREE UPS GROUND SHIPPING  
    S24-9772 Sager

  12. I ended up purchasing this custom Sager computer laptop and am extremeley pleased! It's fast and Sager has great customer service. Well worth my money!

    SPECIAL 9772-S SPECIAL PACKAGE
    NP9772U-0 17.3" FHD/MATT NOTEBOOK 8F01SC033444 $2,819.00
    WIN7-S3 WINDOWS 7 PROFESSIONAL 64 BIT  
    CG-ICD IC Diamond on CPU + GPU 
    D-I74790K Core i7 4790K(4.0 GHz) 8M
    V-9772-980M nV GeForce GTX 980M w/8GB 
    R3-32G-4H18 32GB 1866 HYPERX (4 DIMMS) 
    M2P-941-512 SAMSUNG XP941 512G M.2 PCIe SSD   
    H13-1TB-S7 2.5" SATA 1TB(7200rpm) HDD  
    W2-N1525 KILLER WLAN N1525 AC+BT M.2  

    Complete Sager Branding   $0.00 $0.00 1 1 NDP-SCREEN 30 DAYS NO DEAD PIXEL GUARANTEE  
    S-FREE FREE UPS GROUND SHIPPING  
    S24-9772 Sager

  13. Hi,
    I purchased a brand new Sager Laptop Computer to run Chief faster, below are the specs. It runs my big file fast; except for the orthographic full overview which takes one minute & six to twelve seconds to open. I ran task manage while creating a rendering for this drawing. Max CPU usage by Chief was 24%, but average 16%. Max RAM usage was almost 4 GB of an available 32 GB.

    Here is a video of me opening it; so, you can see how slow.
    http://youtu.be/59fWmB-6jrs

    I emailed Chief Support and they recommended turning off patterns or using the perspective camera instead. My question is if I upgrade computers will it be capable of doing orthographic full overviews with patterns faster? OR is the Chief software limited in it's capabilities, and I should not waste my money.

    The computer salesman recommend I return the computer and upgrade trying one of the two options:
    If you switch to the desktop processor unit with the same GTX980M card, your cost would be $2,784.00 each which costs less than your current one; however, if you want to go for the super expensive Quadro K5100M card, your cost would be $4,234.00.

    Please let me know if you think one of the options would run the full orthographic view faster, before I spend more money on upgrades. If so, which option should I select?

    Below are the computer specs for the new computer I purchased:
    NP9377U-1 17.3" FHD/MATT,w/BR READER 8F01SC031879 $2,918.00 $2,918.00
    1 1 WIN7-S3 WINDOWS 7 PROFESSIONAL 64 BIT $0.00 $0.00
    1 1 CG-ICD IC Diamond on CPU + GPU $0.00 $0.00
    1 1 M-I74910 CORE i7 4910MQ 2.9 GHz 8MB $0.00 $0.00
    1 1 V-9377-980M nV GeForce GTX 980M w/8GB $0.00 $0.00
    1 1 R3-32G-4H 32GB DDR3 HYPERX (4 DIMMS) $0.00 $0.00
    1 1 M14-550256A CRUCIAL M550 256G mSATA (OS) $0.00 $0.00
    1 1 H13-1TB-S7 2.5" SATA 1TB(7200rpm) HDD $0.00 $0.00
    1 1 WB-7260-AC INTEL WIRELESS-AC 7260 AC+BT $0.00 $0.00
    1 1 LOGO-1 Complete Sager Branding

    Thanks,

    Jenny
    CAD'signs
    http://issuu.com/burgerja
    www.linkedin.com/in/jennyburger/

     

  14. Hello all,

     

    I'm currently running X6 on an old Vista machine and it's time to upgrade. I'm very familiar with the specs Chief publishes to run X6, but I am looking for actual product recommendations. It must be a laptop as for the new few years, I will be traveling a good bit.

     

    I've been thinking about Alienware in particular the one third on the right on this page: http://www.dell.com/us/p/alienware-18/pd.aspx

     

    Now, I'm well aware of what people say about Alienware - that it's overpriced. I know that. However, in my situation, I am willing to pay a premium to get a high performance machine and relatively quickly. As you can see, spec wise, the Alienware 18 ******should****** run X6 brilliantly. Has anyone else used Alienware to run Chief or have another manufacturer to suggest?

     

    Thanks,

     

    Jenny