evergreen

Members
  • Posts

    221
  • Joined

  • Last visited

Posts posted by evergreen

  1. This is as close as I can get OOTB.
    The foundation is "Walls with Footings"
    The "Normal" walls are set to "Foundation Walls" - I put them on a different layer for more control.

    (make the necessary adjustments for the wall footing to fit on top of stem wall)
    Level 1, Room Specification, set floor finish to 0" and floor structure to "concrete",  3" thick.

    Make a few more minor adjustments to Cad detail in Elevation to get to exact look/design.

     

    Edit: See Attached

    post-82-0-17296800-1424111091_thumb.jpg

    post-82-0-64935100-1424120047_thumb.jpg

  2. Chief Architect as mentioned before so many times (and I'm still practicing with this concept) is a room based program. When you create a room there are so many other options available like floors, moldings, roofs, ceilings,  roof returns, etc., etc.

    When you go outside of this method, and create slabs from P-solids, for example, it creates more work (more manual drafting), not to mention undesirable issues, just to get to the final look/design.

    So doing as Glenn first wrote, I was able to include some of these features along with what I wrote above to correct the frieze board.

    Hope its in alignment to your final look/design.

    BTW, I did not have available the same stone you used...an easy fix.

    post-82-0-26425900-1424016290_thumb.jpg

    post-82-0-67680100-1424016306_thumb.jpg

  3. I tried snapping a cad line to the middle of the wall as you are showing, and no luck...went into defaults and just for the heck of it changed the "Resize About" to the center, no luck...the grips are at the center, but you get no indication when trying to snap a cad line....hmmm, not sure.

  4. I have installed many bay/bow/garden windows and I am really surprised at the lack of library options...I'm from the northeast. Maybe out west, these kinds of windows aren't so popular!

    Just to get this straight, these types of windows I am referring to, like most other windows, are constructed by way of a "rough-in". Then depending on the manufacturer, install support brackets under what protrudes or cable to the rafters (or both).

    Its a whole lot easier and lighter on the wallet to do it this way then what is suggested by default in CA (to extend out the floor and build walls where you rough-in for windows).

    post-82-0-33286600-1423601294_thumb.jpg

    post-82-0-05810000-1423601316_thumb.jpg

    post-82-0-46346900-1423601339_thumb.jpg

    post-82-0-00520300-1423601358_thumb.jpg

  5. The manual roof tool  post-82-0-61277200-1423499484.jpg. as Robert had suggested is located within the roof toolbar.

     

    A better approach, IMO, is to know how this room fits into the rest of the house...It will, of course, require you to take some additional measurements...take some pictures of the house and then you can better design what you are after.

     

  6. That was my next concern, spend all this time creating these very real looking textures only not to see it reflected in a CA Ray Trace.

    In my quest, however, I did stumble across a free website "cgtextures.com". There are a lot, probably a thousand plus textures to choose from.

    I have tinkered with Genetica 4.0, great for taking the above images and making them seamless.

  7. You can draw a cad line (snap to a corner of the terrain perimeter) then use "Transform/Replicate Object" to offset the line. Then use "Break Line" tool at the intersection of the offset line and the terrain perimeter.

    Modify terrain perimeter as needed.

  8. See attached.

    I like what I see. Neat stuff.

    I would like some feedback on those that do create stuff like this and bring it into Chief.

    Whether it is grass, brick, wood siding, tile, etc. etc.

    I have seen videos from software like "Blender", " CrazyBump", "Genetica"

    Big learning curves, especially when you don't know the "lingo".

    I am, however, hearing over and over again the talk of "maps", normal, specular, displacement, (can't think of the rest right now) and I believe these are used in layers to achieve the final product.

    A lot of adjustments available to the user, but for the beginner, a bit overwhelming!

     

    Can someone who uses this stuff put together a simple example of how you create say something like brick or wood siding (or something) and then actually apply it to the coordinating object (wall or floor say) in Chief.

     

    OR

     

    Can Chief already do this?

     

    Thanks in advance

    post-82-0-20587600-1422721341_thumb.jpg