capitaldesigns

Members
  • Posts

    448
  • Joined

  • Last visited

Posts posted by capitaldesigns

  1. I was following along with this tutorial when I drew the plan. I did exactly what he was showing in the tutorial. His trusses sit on top of the top plates and mine sit below the top plates. 

     

    I just called tech support. They said to copy the dimension shown in "vertical structure depth" and paste in the the "heel height". This will place the truss on top of the top plates.

     

    Thanks,

    Mike

  2. I doing a small practice project using trusses. When I do a cross section I see that the trusses are not sitting on top of the top plates, they are sitting about 4" below the top plates. I'm sure there is a setting that controls how the trusses sit on the top plates. I don't know what that setting is. 

     

    I'm using X15. I attached a copy of the plan.

     

    Thanks,

    Mike

    Truss Plan.plan

  3. I tried what you suggested. I would not work. I tried in plan view, elevation view and perspective view. There was no handles at the break on either side of the door. There is an edit handle that move the entire molding polyline around the building. I gave up and redrew the molding polyline again. That works.

     

    Thanks,

    Mike

  4. I am working on project where we have an exterior molding polyline going around the ADU. There are two exterior doors where the molding is cut (not continuing across the doors).
    We made one of the door narrower. Originally it was 36" wide now it will be 30" wide. The molding has not adjusted the the smaller door. It is stopping 2" short on either side of the door.

     

    There must me a way to adjust the molding polyline so it is cut off at the door and not 2" short. I just know how to do it.

    Thanks,

    Mike

     

     

  5. Is there a way to resize text in one direction only ? Every once in a while I am working on as project that has a title that is a little longer than my title block.
    I want to kept the height of the text but reduce the length. In AutoCAD you can reduce or increase an object or text in either the X or Y direction. Is there a way do do this in Chief ?

    Thanks,

    Mike

  6. Is there a way to create a line style with arrows along the length of the line? In the line style specifications you can only add a dash, dot or text. No symbols.

    I am working on a project on a 40 acre lot. The building department wants me to show on the site plans H.C. path of travel and emergency access route. They

    want me to use lines with arrows to show the direction of travel.

     

    Thanks,

    Mike

     

  7. I am trying to setup dimension defaults going from a scale of 1"=10" to 1"=150'.

    I am having a problem setting the line separation and 1st Line Offsets. 
    Chief will not let me increase past 16'-8". 
    At 1"=150' that puts the 1st Line Offset to close to the building. I need the offset to be closer to 55' at this scale.

     

    Is there a way to increase the offset ?

     

    Thanks,

    Mike

     

    Screenshot Dimension Defaults.jpg

  8. I just finished creating a number of text style sizes and save it as my default  template. Is there a way to import them into an existing plan.

    I tried using the import default settings, default sets and layer sets. The text style do not show up in the existing plan.

    Thanks,

    Mike

  9. I am working on a covered patio with arched opening. I following ds hall video titled arches and corner windows showing how to build these arches.

    I am encountering two problems that I do not know how to resolve.

     

    I can not get rid of a piece of a wall that shows up at one of the corners of the patio. Does anyone know how to get rid of this wall ?

    The other problem is the client wants the arch of the patio to end over an existing door leading into the house. With the arch ending

    over the door the door gets covered up with stucco. Is there a way to prevent the door from being covered up with stucco ?

     

    I've included the plan file and a screen shoot of a perspective view of the back of the patio. I marked up the two areas I am having the problems.

     

    Thank You,

    Mike

     

     

    1846846860_BruceJones-Design1.plan

  10. I am working on a project where the client wants a guardrail to be placed around the perimeter of their roof.
    Their roof is a 2:12 pitch. I can not get it to work.  

    Is there a way to place a guardrail over roof surface ?

    Thanks,

    Mike

  11. I am working on the plans for a new house with slab foundation.

    The footings around the garage doors are not generating correctly.

    They are extending out past the outside edge of the walls by around 6 inches.

    I want the outside edge of the footing to align with the outside edge of the stud wall.

    I have marked up problem areas on the plans. Could someone take a look at the attached

    plan and let me know how get the footings around the garage doors to generate correctly.

     

    Thanks, Mike

    178 Arcturus Street Design Plan-2.zip

  12. When drawing a patio/porch with concrete slab, how do you get the conc. slab to extend past the posts by 6" to 12" ?

    I am working on a patio where I am using 6x6 posts on an 18"x18" stone base. 6" of the stone base is off the slab.

    Thanks,

    Mike