mountaineer

Members
  • Posts

    56
  • Joined

  • Last visited

Posts posted by mountaineer

  1. Thank you DB!  That is exactly what it was!  Not sure how it got unchecked.  And yes, apologies.  I always forget to update my signature when I upgrade my versions.

    And Ryan, good advice!  BTW...your videos have been a MAJOR part of my learning Chief over the last 9 years.  I am self taught and could have never been successful without the generosity of you and others that share your videos on troubleshooting, issues and general helpful information.  Thank you very much for your work!!

     

    • Like 1
  2. Thank you.  I'm able to designate what openings get dimensioned and how.  I'm just not able to pick up exterior walls without picking up interior walls as well.  I'm trying to just get my window centerline dimensions from the corner of my perimeter wall without picking up the interior walls as well.  I haven't found anywhere to make that adjustment.  Thanks for your reply and assistance.

     

  3. Hi guys.  Chief x12 user, been at it a while but still consider myself a beginner.

    Is there a way to draw centerline dimensions on the exterior and only pick up perimeter walls and center of window openings without picking up the interior walls into the dimension line?  Thanks in advance.

     

  4. 9 minutes ago, Joe_Carrick said:

    I have no idea who the user is that goes by the name "Signatures" but the request isn't without merit. 

     

    When we get questions it's often not possible to answer without knowing what version of the software is being used.  Sometimes it's a Home Designer product and sometimes it's a Chief Architect product.  In addition, the capabilities of newer versions are different than prior versions and it really helps to know what the version is in order to give the best answers.

     

    In addition, if a plan is posted it's much easier for us to see exactly what the problem might be rather than just guessing.  It helps you get the right answer quicker and saves us making guesses that might not help at all.

    Thank you Yoda.  I updated my signature.  I posted that I was using Chief Architect 9, I should have been more specific.  I usually upload my plan but my 2nd floor was blank so I was more interested if anyone was familiar with that error code since there was nothing in Knowledge base.  Thanks for your input.  I truly respect and appreciate all of the users that are willing to help, especially being a rookie user.  I just felt that "Signatures" comment brought nothing positive to the conversation and I guess I just felt it was unnecessary.  Hopefully someday as I get better at this I'll be able to offer help to new users as well.  Thanks again for your input, it is truly appreciated.

     

    9 minutes ago, Joe_Carrick said:

     

     

  5. 4 minutes ago, solver said:

     

    I noticed that, but I see now that you are using X9, not version 9 -- they are different.

    Thank you Eric!  I honestly had no idea there was a difference between x9 and version 9.  I do appreciate your help very much.  I updated my signature.

     

    5 minutes ago, solver said:

     

    I noticed that, but I see now that you are using X9, not version 9 -- they are different.

     

  6. 21 minutes ago, mountaineer said:

    Hey guys.  I'm using Chief Architect version 9.  I just got and error message that says "Could not connect new stairwell railings to some of the existing walls or railings, so could not make the open stairwell room."

    I've never seen this error before and there isn't anything in the knowledge base?  Wasn't sure if anyone has seen this.  At this point I have a blank 2nd floor and my cross section looks fine as far as stair height.

     

    Thanks everyone for the positive input and help!  I greatly appreciate it.  I deleted my 1st floor walls around my stairs and it fixed the problem.  Then I was able to just draw them back in.

    To the Signature comment.....I explained in my post I was using version 9.  I don't use forum often and apparently forgot to update my version in my signature.  Thank you for pointing that out but the others were able to suggest input without a problem.  Not sure why you felt the need to comment.

     

    • Upvote 1
  7. 1 minute ago, solver said:

    Copy your 2nd floor walls, delete the 2nd floor, create a new blank on and paste/hold position to put the walls back.

     

    And when that does not work, post the plan file.

    Thank you!

     

  8. Hey guys.  I'm using Chief Architect version 9.  I just got and error message that says "Could not connect new stairwell railings to some of the existing walls or railings, so could not make the open stairwell room."

    I've never seen this error before and there isn't anything in the knowledge base?  Wasn't sure if anyone has seen this.  At this point I have a blank 2nd floor and my cross section looks fine as far as stair height.

     

  9. I changed the color of my deck posts etc.  Received the warning of changing deck materials.

    Now when I try to move my deck railing, only the railing moves and the deck underneath stays put.

    I deleted all the decking and drew it again, now I just get railing with no deck.  I know there is a check in a box somewhere to fix but have had no luck.

    Any input would be greatly appreciated.

     

    Chief 9 semi rookie user.

  10. Ok, this might be a very basic question but.... here goes.

    I need my foundation to be 1.5" less on all four sides than my main floor perimeter dimensions to accommodate siding over the top section of the foundation wall.  I can't just change the dimensions because it doesn't change equally on all four sides.

    I know there is a way to add a -dimension but I haven't had success.  Also, if I push the wall manually it only allows me to move in 1" increments.  Is there a way to push the wall just 1/2"?  Any suggestions would be great.  Thanks in advance for any input.

  11. Thanks Shane!  I'm struggling with the corners meeting under my dormers? If I pull that attic wall over it won't connects.

    Also on the side with the double gable porch.  If you select the exterior wall and zoom in, there are all these crazy points that don't meet.  No matter what I do I can't clean them up.  Is it something in my wall setting or maybe because of the roof?  I have been banging my head trying to clean up that one little area.

  12. Ok.  First, I know there are plenty of issues with this plan that I'm still trying to clean up.  But, I cannot figure out why I have a piece of floor sticking out of the side of my dormer?  I've attached the plan, any input is greatly appreciated.

  13. I'm struggling with how to connect room walls to my shed dormer walls.  I don't know if I need to change wall type?  Any input is greatly appreciated.  I'm a rookie user still navigating my way through.  I've attached the plan I'm working on.  I know there are a lot of things that need corrected on this plan but so far I'm stuck on the second floor.

    Chief Shed Dormer Problem.plan