SteveNovato

Members
  • Posts

    55
  • Joined

  • Last visited

Posts posted by SteveNovato

  1. Rob's solution is just what I want. I am still on X12 and have not been able to duplicate the different percentages of transparency. I have attached a test plan (X12) and some different views. The bath on the left has a glass wall and glass shower door. I am able to make this clear or opaque only. I set the glass to 'general material' but can't get anything but zero or 100% transparency, no matter what percentage is chosen. The plan on the right is a tub with an enclosure from the library. Both enclosures have the same setting in the 'adjust material definition' tool, and both are listed as 'general material'. So far I have been unable to make the enclosure from the library transparent. My old workaround is to delete surface on one of the doors when showing a bath elevation.

     

    Is it time to upgrade or is there a solution?

     

    TIA,

     

    Steve

    834220402_VectorView.thumb.jpg.f846e96d339d3a6621d89d702194fba2.jpg862525525_StandardView.thumb.jpg.94b5ecc36cec18b4781edc817fec0b55.jpg217458029_ElevationVector.thumb.jpg.7c5b6a0e570a28e90816543ebd5602c5.jpg

    Glass tranparency test.plan

  2. I have not designed a home with off grid solar, but there is (was) apparently a fire danger with batteries, along with backup gas generators that make this equipment better suited when it is detached from the house. This may be a thing of the past with changing battery technoligies (lithium ion vs Lifpo4), but something to be aware of...

     

    Check codes in your area for guidance.

     

    Steve

  3. It looks like some sort of batten trim. Click on these random pieces to determine if they are on the framing layer...they are most likely on another layer that nedds to be turned off in the framing views.

     

    Steve

  4. How about a cross section or elevation with the adjusted height, along with a plan note? I have been schooled (yelled at) by my engineer for 30+ years. My uneducated guess is that 1 foot of ceiling height will not change much of the engineers calculations...

     

    Steve

  5. I have found that Excel works best for me. Print spreadsheet to pdf, them import pdf to Chief. When you update the spreadsheet (and again print to pdf) the pdf in Chief is automatically updated.

     

    So many ways to do the same thing!

     

    Steve

  6. Dermot,

     

    Thanks for the info. I think I have it now... 

     

    Renerabbitt gave me direction, and my daughter told me to put the photos in Word and use the Word compression tool. I was able to insert four slightly larger photos into my layout with a total layout file size of under 12,000 kb.

     

    All I have to do is remember this trick for the next time!

  7. I have inserted iphone (jpeg) photos into my layout. Four photos, 4 1/2 x 6, have bloated the pdf of the layout file appx. 40,000KB. I have searched this forum and the internet for guidance and have not found what I am looking for. I have tried all of the options (PNG, Jpeg, reduced the quality to 50%, black & white, grayscale) and the photo file size is huge either way. As a last resort, I have reduced the size of the photo box on the layout and reduced the quality to whittle down the file size. 

     

    I would like to know if other have this same experience with photos...or, am I doing something terribly wrong to cause this condition?

     

    Thank you,

     

    Steve

    Photo test.layout

  8. Rob,

     

    There are so many variables here. It looks like a tough layout because of the angled wall and 'bump out'. I would guess that the bathroom door would open to the hall?? I usually start with the type/size of appliances the customer wants and place the sink, range and refer (then fill in from there).

     

    Sometimes, putting too much in a plan makes everything function poorly. If you are not pleased with the outcome on paper, you will not like the final result either.

     

    I know this is not what you requested...just my 2 cents worth on getting started.

     

    Steve

  9. It seems that the areas of buildings and lots most always differ, depending on the source. I use the following explanation in my 'building and zoning data';

    FINISHED SQUARE FOOTAGE OF BUILDING CALCULATED USING ANSI METHOD WITH ASSESSOR MAPS AND DATA ALSO INTEGRATED. SQUARE FOOTAGE OF STRUCTURES, OR LOT SIZE, MAY VARY AND ARE NOT GUARANTEED.

     

    I have never had a plan kicked back for a minor discrepancy in these numbers...yet!

     

    Steve

    • Upvote 1
  10. This really clears things up for me! I spent over an hour recently, trying to place the stucco color on adjacent wood siding...YouTube, forums, etc. all to no avail. It seemed to me that something so simple would obviously be user error.

     

    I have been vindicated!

     

    Thank You

  11. Aaron,

    Not sure if this is what you are asking, but...I agree with Greg. As a contractor for 30 years I have found that the the electrical design has to be adjusted as soon as the wall & ceiling finish is removed. It is easy to make ceiling lights symmetrical on a plan, but quite another story when the electrician is working around framing, HVAC, etc. Also, a good electrician will want to do it his or her own way, and I value their expertise.

     

    I usually provide a design for the permit with notes to allow changes to fit job conditions. This also accounts for last minute changes by the homeowner. We work in some insanely picky jurisdictions and I have never had an inspector say that the light or plugs don't match the plan...as long as it is to code!

     

    As for the circuits, I use a simple line drawing. It keeps the electrical plan cleaner, and satisfies the plan checker. I have attached a fire rebuild of a small cottage. It has enough information and is also simple and easy to read. Again, if the city plan checker is happy, we are all happy.

     

    Steve

    Elec sample.jpg

  12. I agree with Larry...just do it.

     

    The first time I did a whole house fire rebuild plan, I got a letter from the building department with 42 items to correct! I was truly enraged. I looked up the codes and listed them in my plan notes. When I re-submitted, the plans examiner told me that the next large project would be easier because I now had all of the required information/notes. I have added many things to the notes (all from new or different requirements from the many local jurisdictions). My notes take up about a half page of a 24x36 sheet. It is a lot of nonsense, but my plans have passed muster even with the some of the more difficult jurisdictions.

     

    Most building departments list requirements and code sections of basic kitchen and bath codes (also decks, fences, etc.). These would be good items to list on your plan notes for these types of jobs.

     

    Learn as you go...it's a fun ride!

     

    Steve

    • Upvote 1