ericepv

You'll have to create a second floor if you want conditioned rooms in that space. Select 'Make new blank plan for the 2nd floor' then draw in the walls manually.

You can start by letting Auto Roof draw it for you and the modify as needed. You can also select the walls for the garage and your front porch and mark them as 'Full Gable Wall' (in the roof tab of the DBX) or use the gable wall tool on the lower toolbar. Take a look at this article  https://www.chiefarchitect.com/support/article/KB-00758/generating-automatic-hip-and-gable-roofs.html

This sounds like something I can help you with. Give me a call to review.

Eric, 585-441-5291

PM sent

I have several symbols of people seated (you provide the seat) that I've acquired over the years, 2d & 3d. Do you need a male or female?

Where is your terrain set relative to the sub-floor of the house?

9 hours ago, ericepv said:

Set your default room height to 8' and then add an air gap to the ceiling finish for the 7.5' rooms.

A very simple way to alter the room height for just one room...

I've done several projects like this, glad to help. PM sent.

Another PBR RT from the same project...

39 minutes ago, Geyatautsilvsgi said:

Good afternoon. I am in need of some assistance on some projects. The cad guy I hired is not working out very well and is behind on the projects and the other gentleman I have used before is booked at this time. I need some assistance getting some drawings finalized and some started. A couple are on a tight deadline so experience with Chief and working efficiently i.e. quickly is a plus. Must have CA X15 Premier. If anyone has the time and is interested please send me a private message and I will respond. If  you are still interested, I will set up a zoom call to show the project and explain what I need to have done. Once I select someone I'll  post it. Thank you.

I'd be happy to help, please give me a call to review.

3 minutes ago, cbucks said:

Thanks very helpful! Is there a way to add pedestals and pavers or decking over the pedestals? 

You can specify the flooring, walls, etc as you would in any other room through the DBX for the room or the walls.

2 hours ago, Ed_Orum said:

Yes, but what difference does the total wall thickness make when all walls are set to align on the main layer outside?

Your problem appears to be in the wall properties and your default settings. This article from the Knowledge base explains it in detail https://www.chiefarchitect.com/support/article/KB-00658/specifying-which-wall-layer-exterior-dimensions-locate.html

22 minutes ago, Ed_Orum said:

I am trying to align the upper wall, a pony wall, with the lower wall, a foundation wall.

I have all walls set to align to the main layer.
When I dimension the drawings, the foundation wall and upper walls do not align.
Wha am I doing wrong?  Plan is attached.
Thanks in advance.

Lane

Pool House.plan 8.03 MB · 1 download

The total thickness of your lower wall (foundation) is 8" but your pony wall (lower section) is 8 15/16".

26 minutes ago, cbucks said:

Good day How do I show a rooftop deck, parapet wall, scuppers, pedestals, etc in CA? Any good videos templates etc?

You'll need to build a new floor, here's a tutorial from the Knowledge base:  https://www.chiefarchitect.com/support/article/KB-00295/creating-a-flat-parapet-roof.html

It looks like you need to adjust the height of your porch. Best to post the plan so we can get a look at whats going on with your plan.

Palmer:

Follow these steps

• Select your top drawer and then click 'Lock from Auto Resize'
• Select the other two drawers and make sure that "Lock from Auto Resize' is unchecked
• Select the 'Vertical Layout Parent' at the top of the list and then click 'Equalize'

The bottom 2 drawers should now be equal size, Check out this article for more info https://www.chiefarchitect.com/support/article/KB-02945/designing-cabinet-fronts.html

- Eric

38 minutes ago, cbucks said:

Sorry new b question how do I show a sloped terrain in a side clip elevation view?

Use a CrossSection/Elevation camera and make sure the Terrain Permiter layer is turned on.

A PBR-RT prepared in X15 for an Architect client...

Renderings are my specialty, give me a call if you'd like to review your project...

46 minutes ago, Amandia said:

I have been using Chief Architect since X7...then upgraded to X8.  I do not use this platform for my construction drawings but as a tool for 3-D visuals.  Looking to upgrade to the current X15. My question is... will I lose all my content developed on X7 and X8? Will all my catalogues migrate with the upgrade?

You can open your files created in earlier versions with X15 but once they are saved in the new version, you cannot open them in an older version. Check out this article from the Knowledge Base https://www.chiefarchitect.com/support/article/KB-01209/message-this-plan-cannot-be-opened.html

There is also an issue with the file type used in older versions, more info here https://www.chiefarchitect.com/support/article/KB-00279/opening-legacy-files.html

I'm in search of 3D symbols for THG bath fixtures, Hamptons collection. I need sink faucets, bath filler, shower fittings, etc. Does anyone have these in your library that you could share?

I'll second what DB said, a picture file is the best way to accomplish this.

Try using a glass panel door with 3 vertical lites and then set the thickness of the muntins to you desired size. In the materials tab, set the glass to a material to match the rest of the door.

Here's a link to Rene's tutorial:

Rob:

Click on the gear icon to the right of the preview panel, that will bring up a drop down menu. From there, click on 'Details' & 'Preview'. You can also do this with the 'Folders' section by right clicking and choosing 'Filter Results'. Rene did a great video on the new library awhile back, if I can find it I'll post it here.

Eric