DougMaddox

Members
  • Posts

    95
  • Joined

  • Last visited

Posts posted by DougMaddox

  1. Hi Wendy

    I looked at your plan file and made some adjustments.  First, check all of your eave heights and overhangs - they all seem to be different.  Second, are you sure of your roof pitches - one is 8 in 12, one is 9 in 12 ,etc.  Then I broke your two crossing roofs using the "3" (break key) at the center.  Then use the "2" (manual join roof planes) key to join the roofs.  This should eliminate the roofs intruding into the house.  Then raise the shed roof plane to 9' at eave and use the "2" key to join the shed with main roof.  Hope this helps

    LenhartPlan2022-withShedRoof-Connected REVISED.plan

  2. Salahuddin,

     

    Use two 6" thick walls with a room divider between.  Then place a door in each wall, opening the way you want.  Might be easiest to make one wall;  add a room divider about two inches away; then add the second wall an inch away and then slide them together.  Worked for me

  3. Hi Bob,

    Not sure if I can be of any help but have done a number of home mods to aid accessibility.  My wife is a paraplegic (has been for 42 years - darn horses) and we have adapted three personal residences.  We (my wife and I) both understand what the problems are for a para but not sure the extent of your disability.

     

    Currently designing a new retirement home for us.  In addition, I have done several commercial buildings which met ADA standards.

     

    My knowledge of SIPs is limited having done only two churches that used them on the roof and that was under the direction of a very knowledgeable Amish craftsman. But, as Eric said, SIPs are merely a type of wall.

     

    Unfortunately, my software is Chief Architect X11 and I see you are using HomeDesigner Pro 2020 which is not totally compatible with Chief Architect X11.  I can read your plans and can send back a revision in Chief but you will not have all tools needed to modify it fully.  You CAN DO some editing but not all.

     

    I can look over what you have done so far which will perhaps point us in the right direction for continuing.  At the moment, I am not clear what you need.

     

    Let me know if I can help.

     

    Doug

  4. Welcome to the forum.  Select the chair or chairs you want to see, go to edit bar and "view draw order tool" and move them up in order.   See help for more info.

     

    By the way, helpful if you add your signature to postings.  See mine below.  Go to your name in upper right corner of this page, select "account settings" then "signature" to add info.

     

    Good luck.

     

    Doug

  5. Teapot,

     

    Good idea to add your signature to you settings - see mine below.  Go to upper right, tap on your name, go to settings, then account settings, then signature and add your info.  Helpful in the future so folks know what you are using.  Good luck and welcome.

  6. Grew up on AutoCad 2.5 through Architectural Desktop and found Chief met my needs better, particularly the 3D and rendering capabilities which I found far superior.  Suggest Chief.  The new Physically based Rendering (PBR) is outstanding.  Good luck.

  7. Silly question, but you used to be able to delete a saved 3d view in the Project Browser by right clicking on the view name and select "delete" or "save as" but that doesn't seem to work anymore since X10.  Also, now to rename a 3d view, you must go to "Edit active camera" and change name there.  Anyone else seeing this?

  8. Also, I have noticed when exporting to .3DS format to go to Sketchfab, that all the used materials (even if they are duplicates) get exported as separate entities including any textures.  Sketchfab only allows up to 100 textures - sometimes only 60 or 70.  Hence the model in Sketchfab is grey with no textures or materials.

  9. Guess not!  But you can do it yourself with the help of online videos from CA, help from this forum, and practice, practice using homes/houses you know.  That is the way I learned it.  Good luck and get going.

     

    Also, please fill our your signature - upper right corner of this forum page.  Helps us to know what you are using.

     

    Go to it!