Mark3D
-
Posts
477 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by Mark3D
-
-
Internet security software was causing me to have slow startup times i changed from bit defender to vipre and that fixed my problems
-
Dropbox sounds good
-
I can do that
-
I would say the same it has learning curb but there forum I would even say they are even more helpful than this forumI've been using Genetica for several years. It is extremely powerful, but the learning curve is very steep.
Also it seems to be dead as far as future development
-
Not sure about incorrect bit but to me I would be using a mouldings line
-
You have pulled the bottom of the wall down i think to bring the stone down to the terrain best to check wall bottom default height and use slabs or other to extend your stone
-
Dont no if this will cause other problem but i selected same height eaves and that got it working
- 1
-
Also VRML and colada I think exports by material but you loose object names
-
That job only
-
Use the rainbow tool on camera view go to texture tab rotate 90 degree
-
If I understand you draw your wall clockwise also you can flip the layer at any time if needed
-
With the small gable pull your roof plans paste the wall cladding buy the thickness of your Fascia and with the big gable hole turn on reference layers extend the gable wall to the point where it will hit the 2 roof plans
https://dl.dropboxusercontent.com/u/29819538/Untitled%201.plan
-
i thought i read that david potter had it working on windows 10 try a search of this forum
-
Have a look at this i removed a lot of elavation data and it seem better but i may have removed to much but it will give you the idea
https://dl.dropboxusercontent.com/u/29819538/Costa%20Rica%20Test.plan
-
You need to adjust your terrain elevation data like it needs to be different on each side of the retaining wall so break your elevation lines on the lower level area and adjust the heights as needed
https://dl.dropboxusercontent.com/u/29819538/Terrain_good2.plan
-
I was just giving it a go I am no expert with stairs but I did try to open your file to see what you came up with but you must not have closed chief when you zip as no data error
-
-
I would print to PDF then from PDF editor export as image that should give a nice sharp image
-
Can give a screen shot image as it helps to understand your situation
-
You need to watch the announcements section they are betta testing it
-
Maybe I am missing something her but I would put that text on another layer turn it of then try the export it could be the problem
-
Something i notice was when i was making symbols in form z jr i was rounding the corners of the mesh and it was making way to many poly faces so now i just chamfer the corners and ca seems to smooth them good enough
-
Good luck with that yes it would be good if ca pin pointer the offender , maybe check there face count or do you have them on different layers maybe you turn layers off to help narrow down the one
-
I will only be one you have imported maybe a sketch up one or maybe you made it your self in some program also check your export folder as I do get a export but it is just missing the imported object
New Chief Architect 3D Viewer - for Mobile Devices
in General Q & A
Posted
There skecthfab that can do similar but it has a serious weekness it can't do rotating plant images so please put that ability in this app and I will be very happy